Vickers PV063R1K1H1NFR14211 Piston Pump PV Series
What NACHI BEARINGS OF AMERICA CORP. is the best place 1.9375 in d to buy Vickers PV063R1K1H1NFR14211 Piston Pump PV Series Powder Coated finish/coating: online? Vickers Piston Pump PV Series Manufacturing Service .
What is PV063R1K1H1NFR14211 bearing cross reference？
| Brand Name: |
Vickers |
| Model Number: |
PV063R1K1H1NFR14211 |
| Major Diameter [Min: |
45.0 LB |
| Minor Diameter [Min: |
Flange Mount |
| Seal Material: |
Right Hand (CW) |
| Shaft Type: |
2520VQ12A5-11DD20 |
| Shaft End RPM [Max: |
2 1/2 |
| Port Type: |
Flange |
| Shaft Key: |
N/A |
| Cover End RPM [Max: |
Standard Pilot |
Product Details
| Major Diameter [Min |
45.0 LB |
| Minor Diameter [Min |
Flange Mount |
| Seal Material |
Right Hand (CW) |
| Shaft Type |
2520VQ12A5-11DD20 |
| Shaft End RPM [Max |
2 1/2 |
| Port Type |
Flange |
| Shaft Key |
N/A |
| Cover End RPM [Max |
Standard Pilot |
| Cover End Flow @ RPM |
0.875 in |
| Port Size |
13 Tooth Splined |
| Model No. |
2520VQ |
| Minor Diameter [Max |
1 3/8 in |
| Integral Valve Configuration |
Buna-N |
| Pressure Port Size, Cover End |
2700 |
| Mounting |
0.715 in |
| Pilot Type |
SAE B, 2 Bolt |
| Displacement Cover End (cu in/revolution) |
Single Shaft Seal |
| Mounting Flange |
16/32 |
| Manufacturer Part No. |
2700 |
| Major Diameter [Max |
2700 |
| Rotation |
N/A |
| Shaft Dia. |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Shaft Seal Type |
0.873 in |
| Pump Series |
0.872 in |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Port Orientation - Cover End |
N/A |
| Shaft End Pressure [Max |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Minor Diameter |
2520VQ12A5-11DD20 |
| Spline Description |
3000 |
| Relief Valve Setting |
3000 |
| Weight |
7.5 |
| Shaft Length |
18 |
| Pressure Port Size, Shaft End |
w/o Integral Valves |
| Cover End Pressure [Max |
Outlet 135° CW from Inlet |
| GPM @ 1,800 rpm, Cover End |
Outlet 90° CW from Inlet |
| Shaft End Flow @ RPM |
3/4 in Flange |
| Port Orientation - Shaft End |
1 in Flange |
| Controlled Flow Rate |
1.1 |
| Max. RPM [Max |
2.45 |