2 Inch | 50.8 Millimeter x 2.563 Inch | 65.1 Millimeter x 1.25 Inch | 31.75 Millimeter MCGILL MR 32 DS Needle Non Thrust Roller Bearings
With over 10170 full-service stores, our NACHI BEARINGS OF AMERICA CORP. 2 Inch | 50.8 Millimeter x 2.563 Inch | 65.1 Millimeter x 1.25 Inch | 31.75 Millimeter MCGILL MR 32 DS Needle Non Thrust Roller Bearings inventory is extensive and our parts are priced 2 Inch | 50.8 Millimeter x 2.563 Inch | 65.1 Millimeter x 1.25 Inch | 31.75 Millimeter right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
What is MR 32 DS bearing interchange?
Brand Name: |
MCGILL |
Model Number: |
MR 32 DS |
Pressure Port Size, Shaft End: |
76.0 LB |
Shaft End Pressure [Max: |
Flange Mount |
Pump Series: |
Right Hand (CW) |
Controlled Flow Rate: |
3525VQ25A21-11DD20 |
Mounting Flange: |
3 |
Minor Diameter: |
Flange |
Shaft Seal Type: |
N/A |
Port Type: |
Standard Pilot |
Product Details
Pressure Port Size, Shaft End |
76.0 LB |
Shaft End Pressure [Max |
Flange Mount |
Pump Series |
Right Hand (CW) |
Controlled Flow Rate |
3525VQ25A21-11DD20 |
Mounting Flange |
3 |
Minor Diameter |
Flange |
Shaft Seal Type |
N/A |
Port Type |
Standard Pilot |
Pilot Type |
1.25 in |
Cover End Pressure [Max |
14 Tooth Splined |
Mounting |
3525VQ |
Shaft Key |
1 15/16 in |
Shaft Dia. |
Buna-N |
Max. RPM [Max |
2500 |
Model No. |
1.04 in |
Weight |
SAE C, 2 Bolt |
Relief Valve Setting |
Single Shaft Seal |
Cover End Flow @ RPM |
12/24 |
Major Diameter [Min |
2500 |
Major Diameter [Max |
2500 |
Port Orientation - Cover End |
N/A |
Shaft Type |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Shaft Length |
1.248 in |
Cover End RPM [Max |
1.247 in |
Manufacturer Part No. |
N/A |
Port Size |
N/A |
GPM @ 1,800 rpm, Cover End |
N/A |
Shaft End Flow @ RPM |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
Shaft End RPM [Max |
3525VQ25A21-11DD20 |
Displacement Shaft End (cu in/revolution) |
3000 |
Spline Description |
3000 |
Pressure Port Size, Cover End |
31.5 |
Minor Diameter [Min |
37.5 |
Seal Material |
w/o Integral Valves |
GPM @ 1,800 rpm, Shaft End |
Outlet 135° CW from Inlet |
Minor Diameter [Max |
Outlet 90° CW from Inlet |
Rotation |
1 in Flange |
Port Orientation - Shaft End |
1 1/4 in Flange |
Displacement Cover End (cu in/revolution) |
4.12 |
Integral Valve Configuration |
4.98 |