0.625 Inch | 15.875 Millimeter x 1.125 Inch | 28.575 Millimeter x 1 Inch | 25.4 Millimeter MCGILL GR 10 S Needle Non Thrust Roller Bearings
What are the types of 0.625 Inch | 15.875 Millimeter x 1.125 Inch | 28.575 Millimeter x 1 Inch | 25.4 Millimeter MCGILL GR 10 S Needle Non Thrust Roller Bearings ? MCGILL Bearing Manufacturing Service . Get Your Free, Instant 0.625 Inch | 15.875 Millimeter x 1.125 Inch | 28.575 Millimeter x 1 Inch | 25.4 Millimeter price, design review. NACHI BEARINGS OF AMERICA CORP.
What is GR 10 S bearing cross reference?
Brand Name: |
MCGILL |
Model Number: |
GR 10 S |
Weight: |
18.0 LB |
Manufacturer Part No.: |
Flange Mount |
Minor Diameter [Max: |
Right Hand (CW) |
Pressure Port Size, Cover End: |
1 1/4 |
Max. RPM [Max: |
NPT |
Mounting Flange: |
N/A |
Port Size: |
11 |
Shaft End Flow @ RPM: |
12 gpm @ 1200 rpm |
Product Details
Weight |
18.0 LB |
Manufacturer Part No. |
Flange Mount |
Minor Diameter [Max |
Right Hand (CW) |
Pressure Port Size, Cover End |
1 1/4 |
Max. RPM [Max |
NPT |
Mounting Flange |
N/A |
Port Size |
11 |
Shaft End Flow @ RPM |
12 gpm @ 1200 rpm |
Controlled Flow Rate |
11 |
Cover End RPM [Max |
0.73 in |
Spline Description |
11 Tooth Splined |
Mounting |
18 / 1800 |
GPM @ 1,800 rpm, Shaft End |
V20 |
Cover End Flow @ RPM |
2.94 in |
Relief Valve Setting |
3/4 in NPT |
Pressure Port Size, Shaft End |
Buna-N |
Port Type |
2400 |
Cover End Pressure [Max |
2200 psi |
Shaft Key |
18 |
Minor Diameter [Min |
P |
Model No. |
SAE A, 2 Bolt |
Shaft Dia. |
P |
Pilot Type |
1 |
Seal Material |
90° CW from Inlet |
Shaft End Pressure [Max |
2.38 |
Port Orientation - Shaft End |
w/o Integral Valves |
Major Diameter [Max |
11D |