1.625 Inch | 41.275 Millimeter x 2.188 Inch | 55.575 Millimeter x 1 Inch | 25.4 Millimeter MCGILL MR 26 N DS Needle Non Thrust Roller Bearings
Question1.625 Inch | 41.275 Millimeter x 2.188 Inch | 55.575 Millimeter x 1 Inch | 25.4 Millimeter MCGILL MR 26 N DS Needle Non Thrust Roller Bearings ? 1.625 Inch | 41.275 Millimeter x 2.188 Inch | 55.575 Millimeter x 1 Inch | 25.4 Millimeter Find what NACHI BEARINGS OF AMERICA CORP. you need faster by Insert Bearing Unit Unit, Type entering your MCGILL Bearing information .
What is MR 26 N DS bearing cross reference？
| Brand Name: |
MCGILL |
| Model Number: |
MR 26 N DS |
| Port Orientation - Cover End: |
75.0 LB |
| Max. RPM [Max: |
Flange Mount |
| Weight: |
Right Hand (CW) |
| Major Diameter [Max: |
3520VQ30A5-1AA20 |
| GPM @ 1,800 rpm, Shaft End: |
3 |
| Model No.: |
Flange |
| Minor Diameter: |
5/16 in |
| Integral Valve Configuration: |
Standard Pilot |
Product Details
| Port Orientation - Cover End |
75.0 LB |
| Max. RPM [Max |
Flange Mount |
| Weight |
Right Hand (CW) |
| Major Diameter [Max |
3520VQ30A5-1AA20 |
| GPM @ 1,800 rpm, Shaft End |
3 |
| Model No. |
Flange |
| Minor Diameter |
5/16 in |
| Integral Valve Configuration |
Standard Pilot |
| Displacement Cover End (cu in/revolution) |
1.25 in |
| Shaft Length |
Straight w/ Key |
| Cover End Pressure [Max |
3520VQ |
| Port Type |
2 1/2 in |
| Pressure Port Size, Shaft End |
Buna-N |
| Shaft End RPM [Max |
2500 |
| Mounting |
N/A |
| Cover End RPM [Max |
SAE C, 2 Bolt |
| Shaft End Pressure [Max |
Single Shaft Seal |
| Shaft Seal Type |
N/A |
| Mounting Flange |
2500 |
| Relief Valve Setting |
2500 |
| Cover End Flow @ RPM |
N/A |
| Major Diameter [Min |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Pump Series |
N/A |
| Minor Diameter [Min |
N/A |
| Pilot Type |
N/A |
| Pressure Port Size, Cover End |
N/A |
| Seal Material |
N/A |
| Shaft End Flow @ RPM |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Port Orientation - Shaft End |
3520VQ30A5-1AA20 |
| Controlled Flow Rate |
3000 |
| Minor Diameter [Max |
3000 |
| Manufacturer Part No. |
7.5 |
| Shaft Key |
45 |
| Spline Description |
w/o Integral Valves |
| Displacement Shaft End (cu in/revolution) |
Outlet 135° CCW from Inlet |
| Rotation |
Outlet Opposite Inlet |
| Port Size |
3/4 in Flange |
| Shaft Dia. |
1 1/4 in Flange |
| GPM @ 1,800 rpm, Cover End |
1.1 |
| Shaft Type |
5.96 |