MCGILL CFE 1 SB Cam Follower and Track Roller - Stud Type
With over 10170 full-service stores, NACHI BEARINGS OF AMERICA CORP. our 5.39 mm Ca min MCGILL CFE 1 SB Cam Follower and Track Roller - Stud Type inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
What is CFE 1 SB bearing interchange？
| Brand Name: |
MCGILL |
| Model Number: |
CFE 1 SB |
| Shaft Key: |
76.0 LB |
| Cover End Flow @ RPM: |
Flange Mount |
| Displacement Shaft End (cu in/revolution): |
7.4 |
| Integral Valve Configuration: |
3525VQ38A21-11AA20-LH |
| Displacement Cover End (cu in/revolution): |
3 |
| Seal Material: |
Flange |
| GPM @ 1,800 rpm, Shaft End: |
N/A |
| GPM @ 1,800 rpm, Cover End: |
Standard Pilot |
Product Details
| Shaft Key |
76.0 LB |
| Cover End Flow @ RPM |
Flange Mount |
| Displacement Shaft End (cu in/revolution) |
7.4 |
| Integral Valve Configuration |
3525VQ38A21-11AA20-LH |
| Displacement Cover End (cu in/revolution) |
3 |
| Seal Material |
Flange |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| GPM @ 1,800 rpm, Cover End |
Standard Pilot |
| Major Diameter [Max |
1.25 in |
| Model No. |
14 Tooth Splined |
| Spline Description |
3525VQ |
| Port Size |
1.9375 in |
| Shaft Length |
Double |
| Cover End RPM [Max |
Buna-N |
| Manufacturer Part No. |
2400 |
| Major Diameter [Min |
1.04 in |
| Shaft Type |
SAE C, 2 Bolt |
| Pump Series |
Single Shaft Seal |
| Shaft End Flow @ RPM |
12/24 |
| Cover End Pressure [Max |
2500 |
| Weight |
2400 |
| Shaft Seal Type |
N/A |
| Shaft Dia. |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Minor Diameter [Max |
1.248 in |
| Minor Diameter [Min |
1.247 in |
| Max. RPM [Max |
N/A |
| Pressure Port Size, Cover End |
N/A |
| Shaft End RPM [Max |
N/A |
| Minor Diameter |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Rotation |
3525VQ38A21-11AA20-LH |
| Port Orientation - Cover End |
3000 |
| Mounting Flange |
3000 |
| Mounting |
31.5 |
| Pilot Type |
57 |
| Pressure Port Size, Shaft End |
w/o Integral Valves |
| Port Type |
Outlet 135° CCW from Inlet |
| Shaft End Pressure [Max |
Outlet Opposite Inlet |
| Port Orientation - Shaft End |
1 in Flange |
| Relief Valve Setting |
1 1/4 in Flange |
| Controlled Flow Rate |
4.1 |