7 Inch | 177.8 Millimeter x 13.5 Inch | 342.9 Millimeter x 11.25 Inch | 285.75 Millimeter DODGE P4B-SD-700 Pillow Block Bearings
With over 10170 full-service NACHI BEARINGS OF AMERICA CORP. stores, our 7 Inch | 177.8 Millimeter x 13.5 Inch | 342.9 Millimeter x 11.25 Inch | 285.75 Millimeter 7 Inch | 177.8 Millimeter x 13.5 Inch | 342.9 Millimeter x 11.25 Inch | 285.75 Millimeter DODGE P4B-SD-700 Pillow Block Bearings inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving ABEC 1 | ISO P0 Precision Class time and your hard-earned dollars.
What is P4B-SD-700 bearing interchange？
| Brand Name: |
DODGE |
| Model Number: |
P4B-SD-700 |
| Seal Material: |
75.0 LB |
| Pump Series: |
Flange Mount |
| Max. RPM [Max: |
Right Hand (CW) |
| Mounting: |
3520V38A8-86BB22R |
| Shaft Length: |
3 |
| Cover End RPM [Max: |
Flange |
| GPM @ 1,800 rpm, Cover End: |
5/16 in |
| Shaft End RPM [Max: |
Standard Pilot |
Product Details
| Seal Material |
75.0 LB |
| Pump Series |
Flange Mount |
| Max. RPM [Max |
Right Hand (CW) |
| Mounting |
3520V38A8-86BB22R |
| Shaft Length |
3 |
| Cover End RPM [Max |
Flange |
| GPM @ 1,800 rpm, Cover End |
5/16 in |
| Shaft End RPM [Max |
Standard Pilot |
| Integral Valve Configuration |
1.375 in |
| Shaft End Flow @ RPM |
Straight w/ Key |
| Model No. |
3520V |
| Pressure Port Size, Shaft End |
3 7/8 in |
| Port Size |
Buna-N |
| Minor Diameter [Max |
1800 |
| Mounting Flange |
N/A |
| Displacement Shaft End (cu in/revolution) |
SAE C, 2 Bolt |
| Minor Diameter [Min |
Single Shaft Seal |
| Controlled Flow Rate |
N/A |
| Shaft End Pressure [Max |
1800 |
| Weight |
1800 |
| Shaft Key |
N/A |
| Shaft Seal Type |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Manufacturer Part No. |
N/A |
| Major Diameter [Max |
N/A |
| Major Diameter [Min |
N/A |
| Minor Diameter |
N/A |
| Port Orientation - Shaft End |
N/A |
| Relief Valve Setting |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Pilot Type |
3520V38A8-86BB22R |
| Cover End Flow @ RPM |
3000 |
| Spline Description |
2500 |
| Rotation |
12 |
| Shaft Type |
57 |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Pressure Port Size, Cover End |
Outlet 45° CCW from Inlet |
| Cover End Pressure [Max |
Outlet 90° CCW from Inlet |
| Displacement Cover End (cu in/revolution) |
3/4 in Code 61 |
| Port Type |
1 1/4 in Code 61 |
| Shaft Dia. |
1.7 |
| Port Orientation - Cover End |
7.4 |