2.362 Inch | 60 Millimeter x 2.205 Inch | 56 Millimeter x 2.756 Inch | 70 Millimeter DODGE P2B-UN2-060M Pillow Block Bearings
2.362 Inch | 60 Millimeter x 2.205 Inch | 56 Millimeter x 2.756 Inch | 70 Millimeter DODGE P2B-UN2-060M Pillow Block Bearings Product Brochures , NACHI BEARINGS OF AMERICA CORP. DODGE Bearing Manufacturing Non-Expansion Expansion Type Service . Get Your 2.362 Inch | 60 Millimeter x 2.205 Inch | 56 Millimeter x 2.756 Inch | 70 Millimeter Free.
What is P2B-UN2-060M bearing interchange？
| Brand Name: |
DODGE |
| Model Number: |
P2B-UN2-060M |
| Minor Diameter: |
76.0 LB |
| Shaft Length: |
Flange Mount |
| Spline Description: |
Right Hand (CW) |
| Shaft End Pressure [Max: |
3525VQ25A21-11DD20 |
| Pressure Port Size, Cover End: |
3 |
| Rotation: |
Flange |
| Mounting Flange: |
N/A |
| Shaft Type: |
Standard Pilot |
Product Details
| Minor Diameter |
76.0 LB |
| Shaft Length |
Flange Mount |
| Spline Description |
Right Hand (CW) |
| Shaft End Pressure [Max |
3525VQ25A21-11DD20 |
| Pressure Port Size, Cover End |
3 |
| Rotation |
Flange |
| Mounting Flange |
N/A |
| Shaft Type |
Standard Pilot |
| Controlled Flow Rate |
1.25 in |
| Cover End Flow @ RPM |
14 Tooth Splined |
| Relief Valve Setting |
3525VQ |
| Shaft End Flow @ RPM |
1 15/16 in |
| Max. RPM [Max |
Buna-N |
| Model No. |
2500 |
| Shaft Seal Type |
1.04 in |
| GPM @ 1,800 rpm, Cover End |
SAE C, 2 Bolt |
| Major Diameter [Min |
Single Shaft Seal |
| Shaft Dia. |
12/24 |
| Pressure Port Size, Shaft End |
2500 |
| Cover End RPM [Max |
2500 |
| Minor Diameter [Min |
N/A |
| Port Size |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) |
1.248 in |
| Weight |
1.247 in |
| Displacement Shaft End (cu in/revolution) |
N/A |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Pilot Type |
N/A |
| Shaft End RPM [Max |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Port Type |
3525VQ25A21-11DD20 |
| Major Diameter [Max |
3000 |
| Manufacturer Part No. |
3000 |
| Cover End Pressure [Max |
31.5 |
| Mounting |
37.5 |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 135° CW from Inlet |
| Minor Diameter [Max |
Outlet 90° CW from Inlet |
| Pump Series |
1 in Flange |
| Port Orientation - Shaft End |
1 1/4 in Flange |
| Seal Material |
4.12 |
| Shaft Key |
4.98 |