3.938 Inch | 100.025 Millimeter x 4.7 Inch | 119.38 Millimeter x 4.25 Inch | 107.95 Millimeter DODGE EP4B-IP-315L Pillow Block Bearings
Question3.938 Inch | 100.025 Millimeter x 4.7 Inch | 119.38 Millimeter x 4.25 Inch | 107.95 Millimeter DODGE EP4B-IP-315L Pillow Block Bearings ? Find N/A Minimum Buy Quantity what 3.938 Inch | 100.025 Millimeter x 4.7 Inch | 119.38 Millimeter x 4.25 Inch | 107.95 Millimeter you need faster by entering your DODGE Bearing NACHI BEARINGS OF AMERICA CORP. information .
What is EP4B-IP-315L bearing interchange？
| Brand Name: |
DODGE |
| Model Number: |
EP4B-IP-315L |
| Weight: |
45.0 LB |
| Major Diameter [Min: |
Flange Mount |
| Minor Diameter [Max: |
Left Hand (CCW) |
| Port Size: |
2520VQ12A5-11CC20LH |
| Relief Valve Setting: |
2.5 |
| Controlled Flow Rate: |
Flange |
| Shaft Seal Type: |
N/A |
| Shaft Key: |
Standard Pilot |
Product Details
| Weight |
45.0 LB |
| Major Diameter [Min |
Flange Mount |
| Minor Diameter [Max |
Left Hand (CCW) |
| Port Size |
2520VQ12A5-11CC20LH |
| Relief Valve Setting |
2.5 |
| Controlled Flow Rate |
Flange |
| Shaft Seal Type |
N/A |
| Shaft Key |
Standard Pilot |
| Shaft Type |
0.875 in |
| Rotation |
13 Tooth Splined |
| Pressure Port Size, Shaft End |
2520VQ |
| GPM @ 1,800 rpm, Cover End |
1 3/8 in |
| Max. RPM [Max |
Double |
| Displacement Shaft End (cu in/revolution) |
2.5 |
| Shaft End Pressure [Max |
2700 |
| Minor Diameter |
0.715 in |
| Port Type |
SAE B, 2 Bolt |
| Cover End Pressure [Max |
Single Shaft Seal |
| Mounting Flange |
16/32 |
| Pressure Port Size, Cover End |
2700 |
| Major Diameter [Max |
2700 |
| Cover End Flow @ RPM |
N/A |
| Model No. |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Mounting |
0.873 in |
| Pilot Type |
0.872 in |
| Shaft Dia. |
N/A |
| Shaft Length |
N/A |
| Minor Diameter [Min |
N/A |
| Port Orientation - Shaft End |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Manufacturer Part No. |
2520VQ12A5-11CC20LH |
| Integral Valve Configuration |
3000 |
| Displacement Cover End (cu in/revolution) |
3000 |
| Shaft End RPM [Max |
7.5 |
| Pump Series |
18 |
| GPM @ 1,800 rpm, Shaft End |
w/o Integral Valves |
| Seal Material |
Outlet 45° CW from Inlet |
| Shaft End Flow @ RPM |
Outlet Inline w/Inlet |
| Port Orientation - Cover End |
3/4 in Flange |
| Spline Description |
1 in Flange |
| Cover End RPM [Max |
1.1 |