Rod Ends DIN 648 DIN ISO 12240-4 Tie Rod
How do NACHI BEARINGS OF AMERICA CORP. I place an 8483.20.40.80 Harmonized Tariff Code EMERGENCY order for a Rod Ends DIN 648 DIN ISO 12240-4 Tie Rod that I want 7.9 Inch | 200 Milli Nominal Bolt Circle Diameter Round to pick up F4B-UN2-211 UNI- Manufacturer Item Number at a our store?
What is 648 bearing interchange？
| Model Number: |
648 |
| Shaft End Pressure [Max: |
30.0 LB |
| Minor Diameter [Min: |
Flange Mount |
| Shaft Key: |
Right Hand (CW) |
| Major Diameter [Min: |
V2010-1F7S5S-11AA12 |
| Pilot Type: |
1 1/2 |
| Major Diameter [Max: |
Flange |
| Port Orientation - Shaft End: |
N/A |
| Port Orientation - Cover End: |
N/A |
Product Details
| Shaft End Pressure [Max |
30.0 LB |
| Minor Diameter [Min |
Flange Mount |
| Shaft Key |
Right Hand (CW) |
| Major Diameter [Min |
V2010-1F7S5S-11AA12 |
| Pilot Type |
1 1/2 |
| Major Diameter [Max |
Flange |
| Port Orientation - Shaft End |
N/A |
| Port Orientation - Cover End |
N/A |
| Port Size |
0.875 in |
| GPM @ 1,800 rpm, Shaft End |
13 Tooth Splined |
| Minor Diameter [Max |
V2010 |
| Rotation |
1 5/16 in |
| Shaft Seal Type |
Buna-N |
| Shaft Type |
3000 |
| Shaft Length |
0.728 in |
| Mounting |
SAE B, 2 Bolt |
| Pressure Port Size, Shaft End |
Single Shaft Seal |
| Integral Valve Configuration |
16/32 |
| Cover End Pressure [Max |
3000 |
| Mounting Flange |
3000 |
| Pressure Port Size, Cover End |
N/A |
| Manufacturer Part No. |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Shaft Dia. |
0.873 in |
| Max. RPM [Max |
0.872 in |
| Model No. |
0.7335 in |
| Shaft End RPM [Max |
0.7225 in |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Cover End Flow @ RPM |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Controlled Flow Rate |
V2010-1F7S5S-11AA12 |
| Seal Material |
2500 |
| Spline Description |
2500 |
| Relief Valve Setting |
7.5 |
| Shaft End Flow @ RPM |
10.5 |
| Minor Diameter |
N/A |
| Cover End RPM [Max |
Outlet 135° CCW from Inlet |
| Weight |
Outlet Opposite Inlet |
| Pump Series |
1/2 in SAE O-Ring |
| Port Type |
3/4 in SAE O-Ring |
| Displacement Cover End (cu in/revolution) |
1 |
| GPM @ 1,800 rpm, Cover End |
1.39 |