Vickers 25M55A 1C 20 Hydraulic Vane Motor For Elevator Scraper Drives
| Displacement Cover End (cu in/revolution): | 75.0 LB |
| Minor Diameter: | Flange Mount |
| Controlled Flow Rate: | Right Hand (CW) |
| Manufacturer Part No.: | 3520VQ30A11-1DD20 |
| Weight: | 3 |
| Major Diameter [Max: | Flange |
| Port Orientation - Shaft End: | 5/16 in |
| Rotation: | Standard Pilot |
| PDF |
|
Product Details
| Displacement Cover End (cu in/revolution) | 75.0 LB |
| Minor Diameter | Flange Mount |
| Controlled Flow Rate | Right Hand (CW) |
| Manufacturer Part No. | 3520VQ30A11-1DD20 |
| Weight | 3 |
| Major Diameter [Max | Flange |
| Port Orientation - Shaft End | 5/16 in |
| Rotation | Standard Pilot |
| Port Size | 1.25 in |
| GPM @ 1,800 rpm, Cover End | Straight w/ Key |
| Mounting Flange | 3520VQ |
| Shaft Seal Type | 2 1/2 in |
| Displacement Shaft End (cu in/revolution) | Buna-N |
| Max. RPM [Max | 2500 |
| Mounting | N/A |
| Cover End Pressure [Max | SAE C, 2 Bolt |
| Integral Valve Configuration | Single Shaft Seal |
| Seal Material | N/A |
| Minor Diameter [Max | 2500 |
| Port Type | 2500 |
| Pump Series | N/A |
| Pressure Port Size, Cover End | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Major Diameter [Min | N/A |
| Cover End RPM [Max | N/A |
| Shaft Key | N/A |
| Minor Diameter [Min | N/A |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Shaft End Flow @ RPM | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Model No. | 3520VQ30A11-1DD20 |
| Shaft Dia. | 3000 |
| Cover End Flow @ RPM | 3000 |
| Shaft End Pressure [Max | 16.5 |
| Pressure Port Size, Shaft End | 45 |
| Pilot Type | w/o Integral Valves |
| Port Orientation - Cover End | Outlet 135° CW from Inlet |
| Relief Valve Setting | Outlet 90° CW from Inlet |
| Shaft Length | 3/4 in Flange |
| Shaft Type | 1 1/4 in Flange |
| Shaft End RPM [Max | 2.22 |
| Spline Description | 5.96 |
25M 35M 45M 50M Vickers Hydraulic Motor Wide Speed Range With Lower Noise