25M 35M 45M 50M Small High Speed Hydraulic Motors With High Pressure
| Shaft Length: | 18.0 LB |
| Minor Diameter [Min: | Flange Mount |
| Pressure Port Size, Shaft End: | Left Hand (CCW) |
| Major Diameter [Min: | 11 gal/min @ 1200 rpm |
| Shaft End Pressure [Max: | 1.25 |
| Cover End Flow @ RPM: | NPT |
| Minor Diameter [Max: | N/A |
| Seal Material: | 11 |
| PDF |
|
Product Details
| Shaft Length | 18.0 LB |
| Minor Diameter [Min | Flange Mount |
| Pressure Port Size, Shaft End | Left Hand (CCW) |
| Major Diameter [Min | 11 gal/min @ 1200 rpm |
| Shaft End Pressure [Max | 1.25 |
| Cover End Flow @ RPM | NPT |
| Minor Diameter [Max | N/A |
| Seal Material | 11 |
| Major Diameter [Max | 11 gpm @ 1200 rpm |
| Max. RPM [Max | 0.73 in |
| Shaft Type | 11 Tooth Splined |
| Displacement Shaft End (cu in/revolution) | 16.5 gpm @ 1800 rpm |
| Cover End RPM [Max | V20 |
| GPM @ 1,800 rpm, Shaft End | 1 1/4 in |
| Integral Valve Configuration | Single |
| GPM @ 1,800 rpm, Cover End | SAE-12 |
| Model No. | Buna-N |
| Controlled Flow Rate | 2500 |
| Shaft Dia. | 2500 psi |
| Minor Diameter | 16 1/2 |
| Port Type | P |
| Displacement Cover End (cu in/revolution) | SAE A, 2 Bolt |
| Shaft End RPM [Max | S |
| Pressure Port Size, Cover End | 1 |
| Shaft Key | Inline w/ Inlet |
| Mounting Flange | 2.2 |
| Relief Valve Setting | w/o Integral Valves |
| Pump Series | 38C |
25M 35M 45M 50M Vickers Hydraulic Motor Wide Speed Range With Lower Noise