RENOWELL BMR Series Hydraulic Vane Motor With Two Inner Check Valves
| Port Orientation - Shaft End: | 35.0 LB |
| Seal Material: | Flange Mount |
| Max. RPM [Max: | Right Hand (CW) |
| Major Diameter [Max: | V2020-1F13S6S-11DD30 |
| Minor Diameter: | 2 |
| Shaft Type: | Flange |
| Controlled Flow Rate: | N/A |
| Pump Series: | N/A |
| PDF |
|
Product Details
| Port Orientation - Shaft End | 35.0 LB |
| Seal Material | Flange Mount |
| Max. RPM [Max | Right Hand (CW) |
| Major Diameter [Max | V2020-1F13S6S-11DD30 |
| Minor Diameter | 2 |
| Shaft Type | Flange |
| Controlled Flow Rate | N/A |
| Pump Series | N/A |
| Shaft Length | 0.875 in |
| Shaft End Pressure [Max | 13 Tooth Splined |
| Spline Description | V2020 |
| Rotation | 1 5/16 in |
| Shaft Key | Buna-N |
| Relief Valve Setting | 2400 |
| Shaft End RPM [Max | 0.728 in |
| Displacement Cover End (cu in/revolution) | SAE B, 2 Bolt |
| Port Orientation - Cover End | Single Shaft Seal |
| Pressure Port Size, Cover End | 16/32 |
| Minor Diameter [Max | 3000 |
| Mounting Flange | 2400 |
| Displacement Shaft End (cu in/revolution) | N/A |
| Pressure Port Size, Shaft End | 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Port Type | 0.873 in |
| Manufacturer Part No. | 0.872 in |
| Integral Valve Configuration | 0.7335 in |
| Pilot Type | 0.7225 in |
| Model No. | N/A |
| Minor Diameter [Min | 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Port Size | V2020-1F13S6S-11DD30 |
| Weight | 2500 |
| Shaft Seal Type | 2200 |
| GPM @ 1,800 rpm, Shaft End | 9 |
| Shaft End Flow @ RPM | 19.5 |
| Mounting | N/A |
| Cover End Flow @ RPM | Outlet 90° CW from Inlet |
| Shaft Dia. | Outlet 90° CW from Inlet |
| GPM @ 1,800 rpm, Cover End | 3/4 in SAE O-Ring |
| Cover End Pressure [Max | 3/4 in SAE O-Ring |
| Major Diameter [Min | 1.19 |
| Cover End RPM [Max | 2.59 |
25M 35M 45M 50M Vickers Hydraulic Motor Wide Speed Range With Lower Noise