Rexroth PGH4 Hydraulic Gear Pump High Running Wear Resistance For Plastic
| Port Size: | 76.0 LB |
| Cover End Flow @ RPM: | Flange Mount |
| GPM @ 1,800 rpm, Cover End: | Right Hand (CW) |
| Max. RPM [Max: | 3525VQ25A21-11AD20 |
| Pressure Port Size, Shaft End: | 3 |
| Shaft End RPM [Max: | Flange |
| Displacement Shaft End (cu in/revolution): | N/A |
| Mounting: | Standard Pilot |
| PDF |
|
Product Details
| Port Size | 76.0 LB |
| Cover End Flow @ RPM | Flange Mount |
| GPM @ 1,800 rpm, Cover End | Right Hand (CW) |
| Max. RPM [Max | 3525VQ25A21-11AD20 |
| Pressure Port Size, Shaft End | 3 |
| Shaft End RPM [Max | Flange |
| Displacement Shaft End (cu in/revolution) | N/A |
| Mounting | Standard Pilot |
| GPM @ 1,800 rpm, Shaft End | 1.25 in |
| Shaft End Pressure [Max | 14 Tooth Splined |
| Shaft Length | 3525VQ |
| Seal Material | 1 15/16 in |
| Integral Valve Configuration | Buna-N |
| Controlled Flow Rate | 2500 |
| Major Diameter [Min | 1.04 in |
| Shaft Type | SAE C, 2 Bolt |
| Port Orientation - Shaft End | Single Shaft Seal |
| Port Orientation - Cover End | 12/24 |
| Minor Diameter | 2500 |
| Minor Diameter [Min | 2500 |
| Pressure Port Size, Cover End | N/A |
| Shaft End Flow @ RPM | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Key | 1.248 in |
| Port Type | 1.247 in |
| Mounting Flange | N/A |
| Cover End Pressure [Max | N/A |
| Displacement Cover End (cu in/revolution) | N/A |
| Shaft Seal Type | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Weight | 3525VQ25A21-11AD20 |
| Pump Series | 3000 |
| Pilot Type | 3000 |
| Cover End RPM [Max | 31.5 |
| Manufacturer Part No. | 37.5 |
| Major Diameter [Max | w/o Integral Valves |
| Relief Valve Setting | Outlet 135° CW from Inlet |
| Spline Description | Outlet Opposite Inlet |
| Shaft Dia. | 1 in Flange |
| Rotation | 1 1/4 in Flange |
| Minor Diameter [Max | 4.12 |
| Model No. | 4.98 |
High Pressure Hydraulic Gear Oil Pump With Low Noise Performance