QT Series Hydraulic Gear Pump For Forging Machinery And Elevators
| Port Type: | 75.0 LB |
| Port Orientation - Cover End: | Flange Mount |
| Manufacturer Part No.: | Right Hand (CW) |
| Shaft Length: | 3520VQ25A5-1CC20 |
| Shaft Type: | 3 |
| Pressure Port Size, Shaft End: | Flange |
| Shaft End Pressure [Max: | 5/16 in |
| Displacement Shaft End (cu in/revolution): | Standard Pilot |
| PDF |
|
Product Details
| Port Type | 75.0 LB |
| Port Orientation - Cover End | Flange Mount |
| Manufacturer Part No. | Right Hand (CW) |
| Shaft Length | 3520VQ25A5-1CC20 |
| Shaft Type | 3 |
| Pressure Port Size, Shaft End | Flange |
| Shaft End Pressure [Max | 5/16 in |
| Displacement Shaft End (cu in/revolution) | Standard Pilot |
| Rotation | 1.25 in |
| Pump Series | Straight w/ Key |
| Cover End Flow @ RPM | 3520VQ |
| Pressure Port Size, Cover End | 2 1/2 in |
| Displacement Cover End (cu in/revolution) | Buna-N |
| Shaft End Flow @ RPM | 2500 |
| GPM @ 1,800 rpm, Cover End | N/A |
| Shaft Seal Type | SAE C, 2 Bolt |
| Controlled Flow Rate | Single Shaft Seal |
| Mounting | N/A |
| Cover End Pressure [Max | 2500 |
| Shaft Dia. | 2500 |
| Mounting Flange | N/A |
| Port Orientation - Shaft End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Seal Material | N/A |
| Pilot Type | N/A |
| Shaft End RPM [Max | N/A |
| Port Size | N/A |
| Minor Diameter [Max | N/A |
| Minor Diameter [Min | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Max. RPM [Max | 3520VQ25A5-1CC20 |
| Major Diameter [Min | 3000 |
| Minor Diameter | 3000 |
| Integral Valve Configuration | 7.5 |
| Major Diameter [Max | 37.5 |
| Relief Valve Setting | w/o Integral Valves |
| GPM @ 1,800 rpm, Shaft End | Outlet 45° CW from Inlet |
| Model No. | Outlet Inline w/Inlet |
| Shaft Key | 3/4 in Flange |
| Weight | 1 1/4 in Flange |
| Spline Description | 1.1 |
| Cover End RPM [Max | 4.98 |
High Pressure Hydraulic Gear Oil Pump With Low Noise Performance