Sumitomo QT External Hydraulic Gear Pump Low Noise For Servo System
| Mounting: | 118.0 LB |
| Displacement Shaft End (cu in/revolution): | Flange Mount |
| Seal Material: | Right Hand (CW) |
| Rotation: | 4535VQ42A35-11AA20 |
| Controlled Flow Rate: | 4 |
| GPM @ 1,800 rpm, Shaft End: | Flange |
| Shaft Dia.: | N/A |
| Integral Valve Configuration: | Standard Pilot |
| PDF |
|
Product Details
| Mounting | 118.0 LB |
| Displacement Shaft End (cu in/revolution) | Flange Mount |
| Seal Material | Right Hand (CW) |
| Rotation | 4535VQ42A35-11AA20 |
| Controlled Flow Rate | 4 |
| GPM @ 1,800 rpm, Shaft End | Flange |
| Shaft Dia. | N/A |
| Integral Valve Configuration | Standard Pilot |
| Shaft End RPM [Max | 1.25 in |
| Cover End RPM [Max | 14 Tooth Splined |
| Displacement Cover End (cu in/revolution) | 4535VQ |
| Pressure Port Size, Cover End | 1.9375 in |
| Spline Description | Buna-N |
| Port Orientation - Shaft End | 2200 |
| Shaft Type | 1.04 in |
| Major Diameter [Max | SAE C, 2 Bolt |
| Mounting Flange | Single Shaft Seal |
| Minor Diameter [Max | 12/24 |
| Max. RPM [Max | 2200 |
| Manufacturer Part No. | 2200 |
| Pressure Port Size, Shaft End | N/A |
| GPM @ 1,800 rpm, Cover End | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Minor Diameter [Min | 1.248 in |
| Pilot Type | 1.247 in |
| Weight | N/A |
| Minor Diameter | N/A |
| Shaft End Pressure [Max | N/A |
| Port Size | 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm |
| Port Orientation - Cover End | 4535VQ42A35-11AA20 |
| Shaft Key | 3000 |
| Port Type | 2500 |
| Shaft Length | 52.5 |
| Major Diameter [Min | 63 |
| Cover End Flow @ RPM | w/o Integral Valves |
| Pump Series | Outlet Opposite Inlet |
| Relief Valve Setting | Outlet Opposite Inlet |
| Cover End Pressure [Max | 1 1/4 in Flange |
| Shaft End Flow @ RPM | 1 1/2 in Flange |
| Model No. | 6.88 |
| Shaft Seal Type | 8.46 |
High Pressure Hydraulic Gear Oil Pump With Low Noise Performance