4.331 Inch | 110 Millimeter x 7.02 Inch | 178.3 Millimeter x 6 Inch | 152.4 Millimeter QM INDUSTRIES QVVPA26V110SEN Pillow Block Bearings
With over 10170 full-service stores, our 4.331 Inch | 110 Millimeter x 7.02 Inch | 178.3 Millimeter x 6 Inch | 152.4 Millimeter QM INDUSTRIES QVVPA26V110SEN Pillow Block Bearings inventory is extensive 62 series: and our 4.331 Inch | 110 Millimeter x 7.02 Inch | 178.3 Millimeter x 6 Inch | 152.4 Millimeter parts are priced right. within 24 hours. This helps you maximize your productivity by saving NACHI BEARINGS OF AMERICA CORP. time and your hard-earned dollars.
What is QVVPA26V110SEN bearing cross reference?
Brand Name: | QM INDUSTRIES |
Model Number: | QVVPA26V110SEN |
Rotation: | 76.0 LB |
Integral Valve Configuration: | Flange Mount |
Max. RPM [Max: | Right Hand (CW) |
GPM @ 1,800 rpm, Shaft End: | 3525VQ38A21-1DB20 |
Mounting: | 3 |
Pilot Type: | Flange |
Cover End Flow @ RPM: | 5/16 in |
Model No.: | Standard Pilot |
Product Details
Rotation | 76.0 LB |
Integral Valve Configuration | Flange Mount |
Max. RPM [Max | Right Hand (CW) |
GPM @ 1,800 rpm, Shaft End | 3525VQ38A21-1DB20 |
Mounting | 3 |
Pilot Type | Flange |
Cover End Flow @ RPM | 5/16 in |
Model No. | Standard Pilot |
Minor Diameter [Max | 1.25 in |
Relief Valve Setting | Straight w/ Key |
Cover End RPM [Max | 3525VQ |
Shaft End Pressure [Max | 2 1/2 in |
Shaft End Flow @ RPM | Buna-N |
Port Orientation - Shaft End | 2400 |
GPM @ 1,800 rpm, Cover End | N/A |
Controlled Flow Rate | SAE C, 2 Bolt |
Minor Diameter | Single Shaft Seal |
Weight | N/A |
Port Orientation - Cover End | 2500 |
Pump Series | 2400 |
Shaft Key | N/A |
Major Diameter [Min | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Pressure Port Size, Cover End | N/A |
Pressure Port Size, Shaft End | N/A |
Shaft Length | N/A |
Port Size | N/A |
Manufacturer Part No. | N/A |
Major Diameter [Max | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
Port Type | 3525VQ38A21-1DB20 |
Mounting Flange | 3000 |
Cover End Pressure [Max | 3000 |
Shaft Type | 31.5 |
Seal Material | 57 |
Displacement Cover End (cu in/revolution) | w/o Integral Valves |
Shaft Dia. | Outlet 45° CCW from Inlet |
Shaft Seal Type | Outlet 90° CW from Inlet |
Spline Description | 1 in Flange |
Minor Diameter [Min | 1 1/4 in Flange |
Shaft End RPM [Max | 4.12 |
Displacement Shaft End (cu in/revolution) | 7.42 |