QM INDUSTRIES QVVFC22V312SN Flange Block Bearings
With over 10170 RoHS, REACH, DRC Con standards met: full-service stores, our QM INDUSTRIES QVVFC22V312SN Flange Block Bearings inventory is extensive and our parts 3/4 in D are priced NACHI BEARINGS OF AMERICA CORP. right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
What is QVVFC22V312SN bearing cross reference?
Brand Name: | QM INDUSTRIES |
Model Number: | QVVFC22V312SN |
Port Type: | 45.0 LB |
GPM @ 1,800 rpm, Shaft End: | Flange Mount |
Model No.: | Left Hand (CCW) |
GPM @ 1,800 rpm, Cover End: | 2520VQ14E14-11CC20-LH |
Port Orientation - Shaft End: | 2.5 |
Major Diameter [Min: | Flange |
Minor Diameter [Min: | N/A |
Pump Series: | Standard Pilot |
Product Details
Port Type | 45.0 LB |
GPM @ 1,800 rpm, Shaft End | Flange Mount |
Model No. | Left Hand (CCW) |
GPM @ 1,800 rpm, Cover End | 2520VQ14E14-11CC20-LH |
Port Orientation - Shaft End | 2.5 |
Major Diameter [Min | Flange |
Minor Diameter [Min | N/A |
Pump Series | Standard Pilot |
Port Orientation - Cover End | 0.875 in |
Shaft End RPM [Max | 13 Tooth Splined |
Weight | 2520VQ |
Cover End Pressure [Max | 1 3/8 in |
Shaft Length | Double |
Major Diameter [Max | Buna-N |
Mounting Flange | 2700 |
Shaft Dia. | 0.715 in |
Relief Valve Setting | SAE B, 2 Bolt |
Displacement Shaft End (cu in/revolution) | 2.8 |
Shaft Type | 16/32 |
Pressure Port Size, Cover End | 2700 |
Pressure Port Size, Shaft End | 2700 |
Minor Diameter [Max | N/A |
Manufacturer Part No. | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Max. RPM [Max | 0.873 in |
Shaft Seal Type | 0.872 in |
Minor Diameter | N/A |
Integral Valve Configuration | N/A |
Displacement Cover End (cu in/revolution) | N/A |
Shaft End Pressure [Max | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Cover End RPM [Max | 2520VQ14E14-11CC20-LH |
Controlled Flow Rate | 2000 |
Seal Material | 3000 |
Mounting | 21 |
Pilot Type | 21 |
Port Size | w/o Integral Valves |
Shaft Key | Outlet 45° CW from Inlet |
Rotation | Outlet Inline w/Inlet |
Shaft End Flow @ RPM | 1 1/16 in SAE O-Ring |
Cover End Flow @ RPM | 1 in Flange |
Spline Description | 2.8 |