2 Inch | 50.8 Millimeter x 2.563 Inch | 65.1 Millimeter x 1.25 Inch | 31.75 Millimeter MCGILL MR 32 DS Needle Non Thrust Roller Bearings
With over 10170 full-service stores, our NACHI BEARINGS OF AMERICA CORP. 2 Inch | 50.8 Millimeter x 2.563 Inch | 65.1 Millimeter x 1.25 Inch | 31.75 Millimeter MCGILL MR 32 DS Needle Non Thrust Roller Bearings inventory is extensive and our parts are priced 2 Inch | 50.8 Millimeter x 2.563 Inch | 65.1 Millimeter x 1.25 Inch | 31.75 Millimeter right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
What is MR 32 DS bearing interchange?
Brand Name: | MCGILL |
Model Number: | MR 32 DS |
Pressure Port Size, Shaft End: | 76.0 LB |
Shaft End Pressure [Max: | Flange Mount |
Pump Series: | Right Hand (CW) |
Controlled Flow Rate: | 3525VQ25A21-11DD20 |
Mounting Flange: | 3 |
Minor Diameter: | Flange |
Shaft Seal Type: | N/A |
Port Type: | Standard Pilot |
Product Details
Pressure Port Size, Shaft End | 76.0 LB |
Shaft End Pressure [Max | Flange Mount |
Pump Series | Right Hand (CW) |
Controlled Flow Rate | 3525VQ25A21-11DD20 |
Mounting Flange | 3 |
Minor Diameter | Flange |
Shaft Seal Type | N/A |
Port Type | Standard Pilot |
Pilot Type | 1.25 in |
Cover End Pressure [Max | 14 Tooth Splined |
Mounting | 3525VQ |
Shaft Key | 1 15/16 in |
Shaft Dia. | Buna-N |
Max. RPM [Max | 2500 |
Model No. | 1.04 in |
Weight | SAE C, 2 Bolt |
Relief Valve Setting | Single Shaft Seal |
Cover End Flow @ RPM | 12/24 |
Major Diameter [Min | 2500 |
Major Diameter [Max | 2500 |
Port Orientation - Cover End | N/A |
Shaft Type | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Shaft Length | 1.248 in |
Cover End RPM [Max | 1.247 in |
Manufacturer Part No. | N/A |
Port Size | N/A |
GPM @ 1,800 rpm, Cover End | N/A |
Shaft End Flow @ RPM | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
Shaft End RPM [Max | 3525VQ25A21-11DD20 |
Displacement Shaft End (cu in/revolution) | 3000 |
Spline Description | 3000 |
Pressure Port Size, Cover End | 31.5 |
Minor Diameter [Min | 37.5 |
Seal Material | w/o Integral Valves |
GPM @ 1,800 rpm, Shaft End | Outlet 135° CW from Inlet |
Minor Diameter [Max | Outlet 90° CW from Inlet |
Rotation | 1 in Flange |
Port Orientation - Shaft End | 1 1/4 in Flange |
Displacement Cover End (cu in/revolution) | 4.12 |
Integral Valve Configuration | 4.98 |