MCGILL MCF 35 BX Cam Follower and Track Roller - Stud Type
With over 10170 full-service NACHI BEARINGS OF AMERICA CORP. stores, our MCGILL MCF 35 BX Cam Follower and Track Roller - Stud Type 38 Lateral Width L(mm) inventory is extensive and our parts 20 ~ 30 Height H(mm) Deep Groove Ball Bea Bearing Used are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
What is MCF 35 BX bearing interchange?
Brand Name: | MCGILL |
Model Number: | MCF 35 BX |
Pilot Type: | 45.0 LB |
Spline Description: | Flange Mount |
Shaft End Pressure [Max: | Left Hand (CCW) |
Shaft Seal Type: | 2520VQ21A11-11BC20-LH |
Shaft Dia.: | 2.5 |
Major Diameter [Max: | Flange |
Rotation: | N/A |
Minor Diameter: | Standard Pilot |
Product Details
Pilot Type | 45.0 LB |
Spline Description | Flange Mount |
Shaft End Pressure [Max | Left Hand (CCW) |
Shaft Seal Type | 2520VQ21A11-11BC20-LH |
Shaft Dia. | 2.5 |
Major Diameter [Max | Flange |
Rotation | N/A |
Minor Diameter | Standard Pilot |
Manufacturer Part No. | 0.875 in |
Shaft End RPM [Max | 13 Tooth Splined |
GPM @ 1,800 rpm, Cover End | 2520VQ |
Pressure Port Size, Cover End | 1.375 in |
Mounting | Double |
Mounting Flange | Buna-N |
Shaft Key | 2500 |
Minor Diameter [Min | 0.715 in |
Relief Valve Setting | SAE B, 2 Bolt |
Port Size | Single Shaft Seal |
Cover End Flow @ RPM | 16/32 |
Controlled Flow Rate | 2700 |
Pump Series | 2500 |
GPM @ 1,800 rpm, Shaft End | N/A |
Port Type | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Max. RPM [Max | 0.873 in |
Model No. | 0.872 in |
Port Orientation - Shaft End | N/A |
Port Orientation - Cover End | N/A |
Weight | N/A |
Seal Material | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Shaft End Flow @ RPM | 2520VQ21A11-11BC20-LH |
Pressure Port Size, Shaft End | 3000 |
Minor Diameter [Max | 3000 |
Shaft Length | 16.5 |
Displacement Cover End (cu in/revolution) | 31.5 |
Cover End RPM [Max | w/o Integral Valves |
Integral Valve Configuration | Outlet 45° CW from Inlet |
Cover End Pressure [Max | Outlet 90° CCW from Inlet |
Shaft Type | 3/4 in Flange |
Displacement Shaft End (cu in/revolution) | 4.1 |
Major Diameter [Min | 2.2 |