MCGILL CFE 1 SB Cam Follower and Track Roller - Stud Type
With over 10170 full-service stores, NACHI BEARINGS OF AMERICA CORP. our 5.39 mm Ca min MCGILL CFE 1 SB Cam Follower and Track Roller - Stud Type inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
What is CFE 1 SB bearing interchange?
Brand Name: | MCGILL |
Model Number: | CFE 1 SB |
Shaft Key: | 76.0 LB |
Cover End Flow @ RPM: | Flange Mount |
Displacement Shaft End (cu in/revolution): | 7.4 |
Integral Valve Configuration: | 3525VQ38A21-11AA20-LH |
Displacement Cover End (cu in/revolution): | 3 |
Seal Material: | Flange |
GPM @ 1,800 rpm, Shaft End: | N/A |
GPM @ 1,800 rpm, Cover End: | Standard Pilot |
Product Details
Shaft Key | 76.0 LB |
Cover End Flow @ RPM | Flange Mount |
Displacement Shaft End (cu in/revolution) | 7.4 |
Integral Valve Configuration | 3525VQ38A21-11AA20-LH |
Displacement Cover End (cu in/revolution) | 3 |
Seal Material | Flange |
GPM @ 1,800 rpm, Shaft End | N/A |
GPM @ 1,800 rpm, Cover End | Standard Pilot |
Major Diameter [Max | 1.25 in |
Model No. | 14 Tooth Splined |
Spline Description | 3525VQ |
Port Size | 1.9375 in |
Shaft Length | Double |
Cover End RPM [Max | Buna-N |
Manufacturer Part No. | 2400 |
Major Diameter [Min | 1.04 in |
Shaft Type | SAE C, 2 Bolt |
Pump Series | Single Shaft Seal |
Shaft End Flow @ RPM | 12/24 |
Cover End Pressure [Max | 2500 |
Weight | 2400 |
Shaft Seal Type | N/A |
Shaft Dia. | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Minor Diameter [Max | 1.248 in |
Minor Diameter [Min | 1.247 in |
Max. RPM [Max | N/A |
Pressure Port Size, Cover End | N/A |
Shaft End RPM [Max | N/A |
Minor Diameter | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
Rotation | 3525VQ38A21-11AA20-LH |
Port Orientation - Cover End | 3000 |
Mounting Flange | 3000 |
Mounting | 31.5 |
Pilot Type | 57 |
Pressure Port Size, Shaft End | w/o Integral Valves |
Port Type | Outlet 135° CCW from Inlet |
Shaft End Pressure [Max | Outlet Opposite Inlet |
Port Orientation - Shaft End | 1 in Flange |
Relief Valve Setting | 1 1/4 in Flange |
Controlled Flow Rate | 4.1 |