2.438 Inch | 61.925 Millimeter x 3.28 Inch | 83.312 Millimeter x 2.75 Inch | 69.85 Millimeter LINK BELT PB22639HK4 Pillow Block Bearings
What are the dimensions of 200 Outer Diameter (mm) a 2.438 Inch | 61.925 Millimeter x 3.28 Inch | 83.312 Millimeter x 2.75 Inch | 69.85 Millimeter LINK BELT PB22639HK4 Pillow Block Bearings? LINK BELT Manufacturing Service . Get Your Free, NACHI BEARINGS OF AMERICA CORP. Instant 2.438 Inch | 61.925 Millimeter x 3.28 Inch | 83.312 Millimeter x 2.75 Inch | 69.85 Millimeter Quote!
What is PB22639HK4 bearing interchange?
Brand Name: | LINK BELT |
Model Number: | PB22639HK4 |
Pump Series: | 30.0 LB |
Weight: | Flange Mount |
Manufacturer Part No.: | Right Hand (CW) |
GPM @ 1,800 rpm, Cover End: | V2010-1F8S2S-1DB12 |
Major Diameter [Max: | 1 1/2 |
Spline Description: | Flange |
Mounting: | 3/16 in |
Shaft Key: | N/A |
Product Details
Pump Series | 30.0 LB |
Weight | Flange Mount |
Manufacturer Part No. | Right Hand (CW) |
GPM @ 1,800 rpm, Cover End | V2010-1F8S2S-1DB12 |
Major Diameter [Max | 1 1/2 |
Spline Description | Flange |
Mounting | 3/16 in |
Shaft Key | N/A |
Minor Diameter [Max | 0.875 in |
Cover End Flow @ RPM | Straight w/ Key |
Relief Valve Setting | V2010 |
Shaft End Pressure [Max | 2.3125 in |
Shaft Type | Buna-N |
Shaft Length | 2800 |
Minor Diameter | N/A |
Port Type | SAE B, 2 Bolt |
Controlled Flow Rate | Single Shaft Seal |
Port Size | N/A |
Seal Material | 3000 |
Port Orientation - Cover End | 2800 |
Displacement Cover End (cu in/revolution) | N/A |
Pilot Type | 2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
Shaft Seal Type | N/A |
Shaft End Flow @ RPM | N/A |
Cover End RPM [Max | N/A |
Max. RPM [Max | N/A |
Shaft End RPM [Max | N/A |
Model No. | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Cover End Pressure [Max | V2010-1F8S2S-1DB12 |
Shaft Dia. | 2500 |
Pressure Port Size, Cover End | 2500 |
Integral Valve Configuration | 3 |
Rotation | 12 |
Minor Diameter [Min | N/A |
Displacement Shaft End (cu in/revolution) | Outlet 45° CCW from Inlet |
Major Diameter [Min | Outlet 90° CW from Inlet |
Mounting Flange | 1/2 in SAE O-Ring |
GPM @ 1,800 rpm, Shaft End | 3/4 in SAE O-Ring |
Pressure Port Size, Shaft End | 0.4 |
Port Orientation - Shaft End | 1.62 |