ISOSTATIC FM-5056-30 Sleeve Bearings
How do 225.0000 mm D I place an EMERGENCY order for a ISOSTATIC FM-5056-30 Sleeve Bearings Two Seals & Snap-Rin Accessories that I want to NACHI BEARINGS OF AMERICA CORP. pick 3000 rpm Grease Speed Rating Open/Shielded n1 up at a our store?
What is FM-5056-30 bearing cross reference?
Brand Name: | ISOSTATIC |
Model Number: | FM-5056-30 |
Major Diameter [Max: | 76.0 LB |
Port Orientation - Shaft End: | Flange Mount |
Port Orientation - Cover End: | Left Hand (CCW) |
Max. RPM [Max: | 3525VQ38A21-11AA20-LH |
Minor Diameter [Max: | 3 |
Rotation: | Flange |
Shaft End Flow @ RPM: | N/A |
Manufacturer Part No.: | Standard Pilot |
Product Details
Major Diameter [Max | 76.0 LB |
Port Orientation - Shaft End | Flange Mount |
Port Orientation - Cover End | Left Hand (CCW) |
Max. RPM [Max | 3525VQ38A21-11AA20-LH |
Minor Diameter [Max | 3 |
Rotation | Flange |
Shaft End Flow @ RPM | N/A |
Manufacturer Part No. | Standard Pilot |
Pressure Port Size, Cover End | 1.25 in |
Shaft Length | 14 Tooth Splined |
Pump Series | 3525VQ |
Cover End Flow @ RPM | 1.9375 in |
Port Size | Double |
GPM @ 1,800 rpm, Shaft End | Buna-N |
Shaft Seal Type | 2400 |
Shaft Key | 1.04 in |
Port Type | SAE C, 2 Bolt |
Relief Valve Setting | Single Shaft Seal |
Major Diameter [Min | 12/24 |
Model No. | 2500 |
Pilot Type | 2400 |
Spline Description | N/A |
Cover End Pressure [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Shaft End RPM [Max | 1.248 in |
Displacement Cover End (cu in/revolution) | 1.247 in |
Cover End RPM [Max | N/A |
Seal Material | N/A |
Displacement Shaft End (cu in/revolution) | 7.4 |
Weight | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
Minor Diameter [Min | 3525VQ38A21-11AA20-LH |
Minor Diameter | 3000 |
Mounting Flange | 3000 |
Integral Valve Configuration | 31.5 |
Shaft Type | 57 |
GPM @ 1,800 rpm, Cover End | w/o Integral Valves |
Controlled Flow Rate | Outlet 135° CCW from Inlet |
Shaft Dia. | Outlet Opposite Inlet |
Pressure Port Size, Shaft End | 1 in Flange |
Mounting | 1 1/4 in Flange |
Shaft End Pressure [Max | 4.1 |