ISOSTATIC FF-1102-2 Sleeve Bearings
Online shopping ISOSTATIC FF-1102-2 Sleeve Bearings Removable Metal Shie Accessories from a great selection NACHI BEARINGS OF AMERICA CORP. 182000 N Basic Dynamic Radial Load Rating C at 3000 rpm Grease Speed Rating Open/Shielded n1 Store. ... ISOSTATIC Bearing Accessories.
What is FF-1102-2 bearing interchange？
| Brand Name: | ISOSTATIC |
| Model Number: | FF-1102-2 |
| Spline Description: | 45.0 LB |
| Displacement Shaft End (cu in/revolution): | Flange Mount |
| Shaft Type: | Left Hand (CCW) |
| Minor Diameter: | 2520VQ21A5-1CB20-LH |
| GPM @ 1,800 rpm, Cover End: | 2 1/2 |
| Shaft Seal Type: | Flange |
| Mounting: | 3/16 in |
| Relief Valve Setting: | Standard Pilot |
Product Details
| Spline Description | 45.0 LB |
| Displacement Shaft End (cu in/revolution) | Flange Mount |
| Shaft Type | Left Hand (CCW) |
| Minor Diameter | 2520VQ21A5-1CB20-LH |
| GPM @ 1,800 rpm, Cover End | 2 1/2 |
| Shaft Seal Type | Flange |
| Mounting | 3/16 in |
| Relief Valve Setting | Standard Pilot |
| Manufacturer Part No. | 0.875 in |
| Port Orientation - Cover End | Straight w/ Key |
| Shaft Key | 2520VQ |
| Pilot Type | 1 15/16 in |
| Displacement Cover End (cu in/revolution) | Buna-N |
| Shaft Dia. | 2500 |
| Mounting Flange | N/A |
| Port Orientation - Shaft End | SAE B, 2 Bolt |
| Port Size | Single Shaft Seal |
| Minor Diameter [Min | N/A |
| Integral Valve Configuration | 2700 |
| Cover End Pressure [Max | 2500 |
| Pressure Port Size, Shaft End | N/A |
| Cover End Flow @ RPM | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Model No. | N/A |
| Rotation | N/A |
| Shaft Length | N/A |
| Cover End RPM [Max | N/A |
| Port Type | N/A |
| Minor Diameter [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM | 2520VQ21A5-1CB20-LH |
| GPM @ 1,800 rpm, Shaft End | 3000 |
| Pressure Port Size, Cover End | 3000 |
| Seal Material | 7.5 |
| Pump Series | 31.5 |
| Shaft End Pressure [Max | w/o Integral Valves |
| Weight | Outlet 45° CCW from Inlet |
| Controlled Flow Rate | Outlet Inline w/Inlet |
| Major Diameter [Min | 3/4 in Flange |
| Major Diameter [Max | 1 in Flange |
| Shaft End RPM [Max | 1.1 |
| Max. RPM [Max | 4.12 |
