ISOSTATIC CB-3139-24 Sleeve Bearings
QuestionISOSTATIC CB-3139-24 Sleeve Bearings 35 mm d 20.5 mm B ? Find what you need faster NACHI BEARINGS OF AMERICA CORP. by entering your ISOSTATIC Bearing 0.3 mm r, r1,2 min. information .
What is CB-3139-24 bearing interchange？
| Brand Name: | ISOSTATIC |
| Model Number: | CB-3139-24 |
| GPM @ 1,800 rpm, Shaft End: | 76.0 LB |
| Seal Material: | Flange Mount |
| Manufacturer Part No.: | Right Hand (CW) |
| Pump Series: | 3525VQ38A14-11AA20 |
| Model No.: | 3 |
| Max. RPM [Max: | Flange |
| Shaft Length: | N/A |
| Spline Description: | Standard Pilot |
Product Details
| GPM @ 1,800 rpm, Shaft End | 76.0 LB |
| Seal Material | Flange Mount |
| Manufacturer Part No. | Right Hand (CW) |
| Pump Series | 3525VQ38A14-11AA20 |
| Model No. | 3 |
| Max. RPM [Max | Flange |
| Shaft Length | N/A |
| Spline Description | Standard Pilot |
| Minor Diameter [Max | 1.25 in |
| Rotation | 14 Tooth Splined |
| Shaft Type | 3525VQ |
| Mounting | 1 15/16 in |
| GPM @ 1,800 rpm, Cover End | Double |
| Minor Diameter [Min | Buna-N |
| Displacement Shaft End (cu in/revolution) | 7.4 |
| Cover End Flow @ RPM | 1.04 in |
| Shaft Seal Type | SAE C, 2 Bolt |
| Minor Diameter | Single Shaft Seal |
| Shaft End RPM [Max | 12/24 |
| Mounting Flange | 2500 |
| Pressure Port Size, Shaft End | 2400 |
| Shaft End Pressure [Max | N/A |
| Weight | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Pilot Type | 1.248 in |
| Relief Valve Setting | 1.247 in |
| Port Orientation - Cover End | N/A |
| Cover End RPM [Max | N/A |
| Port Type | N/A |
| Major Diameter [Min | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Shaft Key | 3525VQ38A14-11AA20 |
| Cover End Pressure [Max | 3000 |
| Shaft Dia. | 3000 |
| Port Orientation - Shaft End | 21 |
| Major Diameter [Max | 57 |
| Controlled Flow Rate | w/o Integral Valves |
| Displacement Cover End (cu in/revolution) | Outlet 135° CCW from Inlet |
| Integral Valve Configuration | Outlet Opposite Inlet |
| Pressure Port Size, Cover End | 1 in Flange |
| Port Size | 1 1/4 in Flange |
| Shaft End Flow @ RPM | 2.8 |
