ISOSTATIC AA-620-1 Sleeve Bearings
With over 10170 full-service stores, our ISOSTATIC AA-620-1 Sleeve Bearings inventory is 38.1 mm D2 extensive and our parts are NACHI BEARINGS OF AMERICA CORP. priced right. within 24 hours. This helps you maximize 80 N·m/mrad Static moment stiffness your productivity by saving time and your hard-earned dollars.
What is AA-620-1 bearing cross reference?
Brand Name: | ISOSTATIC |
Model Number: | AA-620-1 |
Major Diameter [Min: | 76.0 LB |
Minor Diameter: | Flange Mount |
Pressure Port Size, Shaft End: | Right Hand (CW) |
Shaft End Pressure [Max: | 3525VQ35A21-1CC20 |
Major Diameter [Max: | 3 |
Spline Description: | Flange |
Cover End Pressure [Max: | 5/16 in |
Rotation: | Standard Pilot |
Product Details
Major Diameter [Min | 76.0 LB |
Minor Diameter | Flange Mount |
Pressure Port Size, Shaft End | Right Hand (CW) |
Shaft End Pressure [Max | 3525VQ35A21-1CC20 |
Major Diameter [Max | 3 |
Spline Description | Flange |
Cover End Pressure [Max | 5/16 in |
Rotation | Standard Pilot |
Shaft Seal Type | 1.25 in |
Mounting | Straight w/ Key |
GPM @ 1,800 rpm, Cover End | 3525VQ |
Pilot Type | 2.5 in |
Max. RPM [Max | Double |
Port Size | Buna-N |
Model No. | 2400 |
Shaft Dia. | N/A |
Displacement Shaft End (cu in/revolution) | 6.9 |
Pump Series | Single Shaft Seal |
Controlled Flow Rate | N/A |
Port Type | 2500 |
Relief Valve Setting | 2400 |
Minor Diameter [Max | N/A |
Shaft Length | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Port Orientation - Shaft End | N/A |
Shaft Type | N/A |
Seal Material | N/A |
Shaft Key | N/A |
Shaft End RPM [Max | N/A |
Manufacturer Part No. | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
Weight | 3525VQ35A21-1CC20 |
Cover End RPM [Max | 3000 |
Cover End Flow @ RPM | 3000 |
Pressure Port Size, Cover End | 31.5 |
GPM @ 1,800 rpm, Shaft End | 52.5 |
Mounting Flange | w/o Integral Valves |
Displacement Cover End (cu in/revolution) | Outlet 45° CW from Inlet |
Integral Valve Configuration | Outlet Inline w/Inlet |
Port Orientation - Cover End | 1 in Flange |
Minor Diameter [Min | 1 1/4 in Flange |
Shaft End Flow @ RPM | 4.1 |