ISOSTATIC AA-1325-4 Sleeve Bearings
We 3300 rpm Oil Speed Rating Open/Shielded n2 Provide NACHI BEARINGS OF AMERICA CORP. Extensive ISOSTATIC AA-1325-4 Sleeve Bearings 203000 N Basic Dynamic Radial Load Rating C Selection 55.00 mm B And Competitive Wholesale Pricing.
What is AA-1325-4 bearing cross reference？
| Brand Name: | ISOSTATIC |
| Model Number: | AA-1325-4 |
| Seal Material: | 45.0 LB |
| Shaft Key: | Flange Mount |
| Rotation: | Left Hand (CCW) |
| Displacement Shaft End (cu in/revolution): | 4.1 |
| Mounting: | 2.5 |
| Minor Diameter: | Flange |
| Shaft Type: | N/A |
| Port Size: | Standard Pilot |
Product Details
| Seal Material | 45.0 LB |
| Shaft Key | Flange Mount |
| Rotation | Left Hand (CCW) |
| Displacement Shaft End (cu in/revolution) | 4.1 |
| Mounting | 2.5 |
| Minor Diameter | Flange |
| Shaft Type | N/A |
| Port Size | Standard Pilot |
| Mounting Flange | 0.875 in |
| Major Diameter [Min | 13 Tooth Splined |
| Shaft Dia. | 2520VQ |
| Shaft Seal Type | 1.375 in |
| Integral Valve Configuration | Double |
| Weight | Buna-N |
| Max. RPM [Max | 2500 |
| Port Orientation - Cover End | 0.715 in |
| Pressure Port Size, Cover End | SAE B, 2 Bolt |
| Port Type | Single Shaft Seal |
| Controlled Flow Rate | 16/32 |
| GPM @ 1,800 rpm, Cover End | 2700 |
| Cover End RPM [Max | 2500 |
| Pilot Type | N/A |
| Pressure Port Size, Shaft End | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Spline Description | 0.873 in |
| Shaft End RPM [Max | 0.872 in |
| Shaft Length | N/A |
| Cover End Flow @ RPM | N/A |
| Shaft End Pressure [Max | N/A |
| GPM @ 1,800 rpm, Shaft End | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | 2520VQ21A11-11BC20-LH |
| Major Diameter [Max | 3000 |
| Minor Diameter [Max | 3000 |
| Relief Valve Setting | 16.5 |
| Manufacturer Part No. | 31.5 |
| Shaft End Flow @ RPM | w/o Integral Valves |
| Minor Diameter [Min | Outlet 45° CW from Inlet |
| Model No. | Outlet 90° CCW from Inlet |
| Pump Series | 3/4 in Flange |
| Port Orientation - Shaft End | 1 in Flange |
| Cover End Pressure [Max | 2.2 |
