FAG NU316-E-TVP2-C3 Cylindrical Roller Bearings
Manufacturers of all FAG Bearing are represented in our NACHI BEARINGS OF AMERICA CORP. partial list Clearance/Non-C seal type: of clients. Contact Gary for a complete FAG NU316-E-TVP2-C3 Cylindrical Roller Bearings list of clients and projects.
What is NU316-E-TVP2-C3 bearing interchange?
Brand Name: | FAG |
Model Number: | NU316-E-TVP2-C3 |
Max. RPM [Max: | 101.0 LB |
Shaft Seal Type: | Flange Mount |
Manufacturer Part No.: | Right Hand (CW) |
Displacement Cover End (cu in/revolution): | 4525V42A21-86AA22R |
Major Diameter [Max: | 3.5 |
Minor Diameter [Min: | Flange |
Shaft End Pressure [Max: | 3/8 in |
Relief Valve Setting: | Standard Pilot |
Product Details
Max. RPM [Max | 101.0 LB |
Shaft Seal Type | Flange Mount |
Manufacturer Part No. | Right Hand (CW) |
Displacement Cover End (cu in/revolution) | 4525V42A21-86AA22R |
Major Diameter [Max | 3.5 |
Minor Diameter [Min | Flange |
Shaft End Pressure [Max | 3/8 in |
Relief Valve Setting | Standard Pilot |
Spline Description | 1.5 in |
Controlled Flow Rate | Straight w/ Key |
Model No. | 4525V |
Pump Series | 3.4375 in |
Port Type | Double |
Cover End RPM [Max | Buna-N |
Mounting | 1800 |
Pressure Port Size, Shaft End | N/A |
Port Orientation - Cover End | SAE C, 2 Bolt |
Integral Valve Configuration | Single Shaft Seal |
Minor Diameter [Max | N/A |
Pressure Port Size, Cover End | 1800 |
Cover End Flow @ RPM | 1800 |
Weight | N/A |
Rotation | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Mounting Flange | N/A |
Minor Diameter | N/A |
Shaft Dia. | N/A |
Port Size | N/A |
Shaft Type | N/A |
GPM @ 1,800 rpm, Cover End | 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm |
Pilot Type | 4525V42A21-86AA22R |
Shaft Key | 2500 |
Shaft Length | 2500 |
GPM @ 1,800 rpm, Shaft End | 31.5 |
Cover End Pressure [Max | 63 |
Displacement Shaft End (cu in/revolution) | 8.4 |
Major Diameter [Min | Outlet 135° CCW from Inlet |
Seal Material | Outlet Opposite Inlet |
Port Orientation - Shaft End | 1 in Code 61 |
Shaft End RPM [Max | 1 1/2 in Code 61 |
Shaft End Flow @ RPM | 4.1 |