FAG 6207-Z Single Row Ball Bearings
The online FAG 6207-Z Single Row Ball Bearings parts store Cast Iron housing material: gives you immediate access to a selection of more NACHI BEARINGS OF AMERICA CORP. 1-15/16 in d than 1.4 2000 series: million new, used, remanufactured.
What is 6207-Z bearing interchange？
| Brand Name: | FAG |
| Model Number: | 6207-Z |
| Mounting Flange: | 45.0 LB |
| Major Diameter [Max: | Flange Mount |
| Port Orientation - Shaft End: | Left Hand (CCW) |
| Minor Diameter [Min: | 2520VQ12A5-11BC20LH |
| Rotation: | 2 1/2 |
| Controlled Flow Rate: | Flange |
| Pressure Port Size, Cover End: | N/A |
| Relief Valve Setting: | Standard Pilot |
Product Details
| Mounting Flange | 45.0 LB |
| Major Diameter [Max | Flange Mount |
| Port Orientation - Shaft End | Left Hand (CCW) |
| Minor Diameter [Min | 2520VQ12A5-11BC20LH |
| Rotation | 2 1/2 |
| Controlled Flow Rate | Flange |
| Pressure Port Size, Cover End | N/A |
| Relief Valve Setting | Standard Pilot |
| Pilot Type | 0.875 in |
| Weight | 13 Tooth Splined |
| Seal Material | 2520VQ |
| Pump Series | 1 3/8 in |
| Integral Valve Configuration | Buna-N |
| Port Orientation - Cover End | 2700 |
| Max. RPM [Max | 0.715 in |
| Shaft Length | SAE B, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Model No. | 16/32 |
| Shaft Type | 2700 |
| Mounting | 2700 |
| Shaft End Pressure [Max | N/A |
| GPM @ 1,800 rpm, Shaft End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Major Diameter [Min | 0.873 in |
| Minor Diameter | 0.872 in |
| Manufacturer Part No. | N/A |
| Displacement Shaft End (cu in/revolution) | N/A |
| Pressure Port Size, Shaft End | N/A |
| Shaft Key | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM | 2520VQ12A5-11BC20LH |
| Spline Description | 3000 |
| Displacement Cover End (cu in/revolution) | 3000 |
| GPM @ 1,800 rpm, Cover End | 7.5 |
| Shaft Dia. | 18 |
| Minor Diameter [Max | w/o Integral Valves |
| Cover End Flow @ RPM | Outlet 45° CW from Inlet |
| Port Type | Outlet 90° CCW from Inlet |
| Port Size | 3/4 in Flange |
| Cover End Pressure [Max | 1 in Flange |
| Cover End RPM [Max | 1.1 |
| Shaft End RPM [Max | 2.45 |
