240 mm x 360 mm x 76 mm FAG 32048-X Tapered Roller Bearing Assemblies
Welcome to the 240 mm x 360 mm x 76 mm 240 mm x 360 mm x 76 mm FAG 32048-X Tapered Roller Bearing Assemblies online 16 mm overall nut width: seller. NACHI BEARINGS OF AMERICA CORP.
What is 32048-X bearing cross reference？
| Brand Name: | FAG |
| Model Number: | 32048-X |
| Max. RPM [Max: | 76.0 LB |
| Displacement Shaft End (cu in/revolution): | 7.4 |
| Cover End Flow @ RPM: | Left Hand (CCW) |
| Pump Series: | 3525VQ38A21-11AA20-LH |
| Shaft Seal Type: | 3 |
| Shaft End RPM [Max: | Flange |
| Seal Material: | N/A |
| Shaft Key: | Standard Pilot |
| PDF |
32048-X |
Product Details
| Max. RPM [Max | 76.0 LB |
| Displacement Shaft End (cu in/revolution) | 7.4 |
| Cover End Flow @ RPM | Left Hand (CCW) |
| Pump Series | 3525VQ38A21-11AA20-LH |
| Shaft Seal Type | 3 |
| Shaft End RPM [Max | Flange |
| Seal Material | N/A |
| Shaft Key | Standard Pilot |
| Port Orientation - Shaft End | 1.25 in |
| Major Diameter [Max | 14 Tooth Splined |
| Shaft End Flow @ RPM | 3525VQ |
| Rotation | 1.9375 in |
| Mounting Flange | Double |
| Shaft Type | Buna-N |
| Minor Diameter | 2400 |
| Cover End Pressure [Max | 1.04 in |
| Cover End RPM [Max | SAE C, 2 Bolt |
| Shaft Dia. | Single Shaft Seal |
| Port Type | 12/24 |
| Pilot Type | 2500 |
| Port Orientation - Cover End | 2400 |
| Pressure Port Size, Shaft End | N/A |
| Pressure Port Size, Cover End | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Integral Valve Configuration | 1.248 in |
| Weight | 1.247 in |
| Shaft Length | N/A |
| Controlled Flow Rate | N/A |
| Port Size | N/A |
| GPM @ 1,800 rpm, Cover End | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | 3525VQ38A21-11AA20-LH |
| Relief Valve Setting | 3000 |
| Model No. | 3000 |
| Major Diameter [Min | 31.5 |
| Minor Diameter [Max | 57 |
| GPM @ 1,800 rpm, Shaft End | w/o Integral Valves |
| Mounting | Outlet 135° CCW from Inlet |
| Minor Diameter [Min | Outlet Opposite Inlet |
| Manufacturer Part No. | 1 in Flange |
| Shaft End Pressure [Max | 1 1/4 in Flange |
| Spline Description | 4.1 |
