| Cover End RPM [Max | 75.0 LB |
| Shaft Type | Flange Mount |
| Max. RPM [Max | Right Hand (CW) |
| Shaft Length | 3520V35A2-1AA22R |
| Manufacturer Part No. | 3 |
| Cover End Pressure [Max | Flange |
| Pilot Type | 5/16 in |
| Cover End Flow @ RPM | 22 |
| Shaft End Flow @ RPM | Standard Pilot |
| Pressure Port Size, Cover End | 3/4 in Code 61 |
| Shaft Dia. | Straight w/ Key |
| Shaft Seal Type | 3520V |
| Major Diameter [Min | 2 7/8 in |
| Relief Valve Setting | Double |
| Shaft Key | Buna-N |
| Port Orientation - Cover End | 1800 |
| Displacement Cover End (cu in/revolution) | 0.4 |
| Major Diameter [Max | SAE C, 2 Bolt |
| Shaft End Pressure [Max | Single Shaft Seal |
| Minor Diameter [Min | N/A |
| Spline Description | Motor |
| Minor Diameter | 1800 |
| Integral Valve Configuration | 1800 |
| Port Orientation - Shaft End | Outlet Opposite Inlet |
| Weight | 2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
| Mounting Flange | N/A |
| Displacement Shaft End (cu in/revolution) | 6.8 |
| Port Size | N/A |
| Pressure Port Size, Shaft End | 1 1/4 in Code 61 |
| Shaft End RPM [Max | N/A |
| Model No. | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Minor Diameter [Max | 3520V35A2-1AA22R |
| GPM @ 1,800 rpm, Shaft End | 4 Bolt Flange Per SAE J518C W/ English Threads |
| Rotation | 3000 |
| Mounting | 2500 |
| Controlled Flow Rate | 3 |
| Seal Material | 52.5 |
| Pump Series | 135° CCW From Inlet Port |
| Port Type | N/A |
| GPM @ 1,800 rpm, Cover End | Outlet 135° CCW from Inlet |
