2.5 Inch | 63.5 Millimeter x 0 Inch | 0 Millimeter x 0.866 Inch | 21.996 Millimeter TIMKEN 395X-3 Tapered Roller Bearings
100% Authentic. 2.5 Inch | 63.5 Millimeter x 0 Inch | 0 Millimeter x 0.866 Inch | 21.996 Millimeter TIMKEN 395X-3 Tapered Roller Bearings NACHI BEARINGS OF AMERICA CORP. 2.5 Inch | 63.5 Millimeter x 0 Inch | 0 Millimeter x 0.866 Inch | 21.996 Millimeter Highest 831.85 mm L Quality. Certified 1 NPT RG Supplier.
What is 395X-3 bearing cross reference？
| Brand Name: |
TIMKEN |
| Model Number: |
395X-3 |
| Port Orientation - Cover End: |
45.0 LB |
| Rotation: |
Flange Mount |
| Shaft Key: |
Left Hand (CCW) |
| Port Size: |
2520VQ12A5-11CC20LH |
| Manufacturer Part No.: |
2.5 |
| Relief Valve Setting: |
Flange |
| Cover End Flow @ RPM: |
N/A |
| Minor Diameter [Min: |
Standard Pilot |
Product Details
| Port Orientation - Cover End |
45.0 LB |
| Rotation |
Flange Mount |
| Shaft Key |
Left Hand (CCW) |
| Port Size |
2520VQ12A5-11CC20LH |
| Manufacturer Part No. |
2.5 |
| Relief Valve Setting |
Flange |
| Cover End Flow @ RPM |
N/A |
| Minor Diameter [Min |
Standard Pilot |
| Cover End RPM [Max |
0.875 in |
| Spline Description |
13 Tooth Splined |
| Seal Material |
2520VQ |
| Pump Series |
1 3/8 in |
| Displacement Shaft End (cu in/revolution) |
2.5 |
| Minor Diameter [Max |
Buna-N |
| Pilot Type |
2700 |
| GPM @ 1,800 rpm, Shaft End |
0.715 in |
| Model No. |
SAE B, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Major Diameter [Max |
16/32 |
| Weight |
2700 |
| Port Orientation - Shaft End |
2700 |
| Max. RPM [Max |
N/A |
| Controlled Flow Rate |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Integral Valve Configuration |
0.873 in |
| Shaft End RPM [Max |
0.872 in |
| Shaft Type |
N/A |
| Cover End Pressure [Max |
N/A |
| Pressure Port Size, Shaft End |
N/A |
| Shaft End Pressure [Max |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End |
2520VQ12A5-11CC20LH |
| Mounting Flange |
3000 |
| Port Type |
3000 |
| Minor Diameter |
7.5 |
| Shaft Length |
18 |
| Displacement Cover End (cu in/revolution) |
w/o Integral Valves |
| Shaft End Flow @ RPM |
Outlet 45° CW from Inlet |
| Major Diameter [Min |
Outlet Inline w/Inlet |
| Pressure Port Size, Cover End |
3/4 in Flange |
| Shaft Dia. |
1 in Flange |
| Mounting |
1.1 |