49,2125 mm x 90 mm x 49,21 mm TIMKEN 1115KLL Insert Bearings Cylindrical OD
100% Authentic. DIN 625-1 standards met: 49,2125 mm x 90 mm x 49,21 mm TIMKEN 1115KLL Insert Bearings Cylindrical OD Highest Quality. NACHI BEARINGS OF AMERICA CORP. 49,2125 mm x 90 mm x 49,21 mm Certified Supplier.
What is 1115KLL bearing cross reference？
| Brand Name: |
TIMKEN |
| Model Number: |
1115KLL |
| Pump Series: |
45.0 LB |
| Cover End Pressure [Max: |
Flange Mount |
| Shaft Dia.: |
Left Hand (CCW) |
| Shaft End Flow @ RPM: |
2520VQ17A5-1AA20-LH |
| Relief Valve Setting: |
2 1/2 |
| Shaft Seal Type: |
Flange |
| Model No.: |
3/16 in |
| Spline Description: |
Standard Pilot |
| PDF |
1115KLL |
Product Details
| Pump Series |
45.0 LB |
| Cover End Pressure [Max |
Flange Mount |
| Shaft Dia. |
Left Hand (CCW) |
| Shaft End Flow @ RPM |
2520VQ17A5-1AA20-LH |
| Relief Valve Setting |
2 1/2 |
| Shaft Seal Type |
Flange |
| Model No. |
3/16 in |
| Spline Description |
Standard Pilot |
| Cover End Flow @ RPM |
0.875 in |
| Mounting Flange |
Straight w/ Key |
| Port Type |
2520VQ |
| Displacement Cover End (cu in/revolution) |
1 15/16 in |
| Minor Diameter |
Buna-N |
| Port Orientation - Cover End |
2500 |
| Weight |
N/A |
| Major Diameter [Max |
SAE B, 2 Bolt |
| Shaft Type |
Single Shaft Seal |
| Pressure Port Size, Shaft End |
N/A |
| Max. RPM [Max |
2700 |
| Displacement Shaft End (cu in/revolution) |
2500 |
| Shaft Length |
N/A |
| Shaft End RPM [Max |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Seal Material |
N/A |
| Pressure Port Size, Cover End |
N/A |
| Minor Diameter [Min |
N/A |
| Cover End RPM [Max |
N/A |
| Controlled Flow Rate |
N/A |
| Pilot Type |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Port Size |
2520VQ17A5-1AA20-LH |
| Minor Diameter [Max |
3000 |
| Shaft End Pressure [Max |
3000 |
| Rotation |
7.5 |
| GPM @ 1,800 rpm, Cover End |
25.5 |
| Manufacturer Part No. |
w/o Integral Valves |
| Port Orientation - Shaft End |
Outlet 135° CCW from Inlet |
| Mounting |
Outlet Opposite Inlet |
| Major Diameter [Min |
3/4 in Flange |
| Integral Valve Configuration |
1 in Flange |
| GPM @ 1,800 rpm, Shaft End |
1.1 |
| Shaft Key |
3.37 |