8.661 Inch | 220 Millimeter x 13.386 Inch | 340 Millimeter x 2.205 Inch | 56 Millimeter SKF 7044 ACDGA/P4A Precision Ball Bearings
The online 8.661 Inch | 220 Millimeter x 13.386 Inch | 340 Millimeter x 2.205 Inch | 56 Millimeter SKF 7044 ACDGA/P4A Precision Ball Bearings parts store gives you immediate access to a 8.661 Inch | 220 Millimeter x 13.386 Inch | 340 Millimeter x 2.205 Inch | 56 Millimeter selection of more than 1.4 million NACHI BEARINGS OF AMERICA CORP. 0.499 Weight new, used, remanufactured.
What is 7044 ACDGA/P4A bearing interchange？
| Brand Name: |
SKF |
| Model Number: |
7044 ACDGA/P4A |
| Cover End Pressure [Max: |
45.0 LB |
| Spline Description: |
Flange Mount |
| Pump Series: |
Right Hand (CW) |
| Minor Diameter [Max: |
2520VQ12A8-1AA20 |
| Mounting: |
2.5 |
| Rotation: |
Flange |
| Major Diameter [Max: |
3/16 in |
| Weight: |
Standard Pilot |
Product Details
| Cover End Pressure [Max |
45.0 LB |
| Spline Description |
Flange Mount |
| Pump Series |
Right Hand (CW) |
| Minor Diameter [Max |
2520VQ12A8-1AA20 |
| Mounting |
2.5 |
| Rotation |
Flange |
| Major Diameter [Max |
3/16 in |
| Weight |
Standard Pilot |
| Pilot Type |
0.875 in |
| Shaft Seal Type |
Straight w/ Key |
| Port Orientation - Cover End |
2520VQ |
| Shaft Dia. |
1.9375 in |
| Shaft Length |
Double |
| Pressure Port Size, Cover End |
Buna-N |
| Relief Valve Setting |
2700 |
| Shaft End RPM [Max |
N/A |
| Shaft Key |
SAE B, 2 Bolt |
| Shaft End Flow @ RPM |
Single Shaft Seal |
| Shaft Type |
N/A |
| Manufacturer Part No. |
2700 |
| Cover End RPM [Max |
2700 |
| Port Size |
N/A |
| Displacement Shaft End (cu in/revolution) |
2.5 |
| Port Type |
N/A |
| Minor Diameter [Min |
N/A |
| Integral Valve Configuration |
N/A |
| Pressure Port Size, Shaft End |
N/A |
| Max. RPM [Max |
N/A |
| Shaft End Pressure [Max |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Cover End Flow @ RPM |
2520VQ12A8-1AA20 |
| GPM @ 1,800 rpm, Cover End |
3000 |
| Major Diameter [Min |
3000 |
| Seal Material |
12 |
| Displacement Cover End (cu in/revolution) |
18 |
| Minor Diameter |
w/o Integral Valves |
| GPM @ 1,800 rpm, Shaft End |
Outlet 135° CCW from Inlet |
| Port Orientation - Shaft End |
Outlet Opposite Inlet |
| Controlled Flow Rate |
3/4 in Flange |
| Mounting Flange |
1 in Flange |
| Model No. |
1.7 |