1.25 Inch | 31.75 Millimeter x 2.75 Inch | 69.85 Millimeter x 0.688 Inch | 17.475 Millimeter RHP BEARING LRJA1.1/4J Cylindrical Roller Bearings
High Quality 1.25 Inch | 31.75 Millimeter x 2.75 Inch | 69.85 Millimeter x 0.688 Inch | 17.475 Millimeter RHP BEARING LRJA1.1/4J Cylindrical Roller Bearings. NACHI BEARINGS OF AMERICA CORP. Competitive RHP Bearing Pricing. Accept 6.24 Hz Characteristic outer ring frequency, BPF0 Small 1.25 Inch | 31.75 Millimeter x 2.75 Inch | 69.85 Millimeter x 0.688 Inch | 17.475 Millimeter Order. Easy and Fast Shipping.
What is LRJA1.1/4J bearing interchange?
Brand Name: |
RHP BEARING |
Model Number: |
LRJA1.1/4J |
Weight: |
Piston Pumps |
Minor Diameter [Min: |
PVQ10 |
Cover End Pressure [Max: |
16.0 LB |
Port Type: |
Flange Mount |
Port Orientation - Shaft End: |
Right Hand (CW) |
Controlled Flow Rate: |
PVQ10-A2R-SE3S-20-CM7-12 |
Shaft End RPM [Max: |
SAE |
Rotation: |
Variable Displacement Open Circuit |
Product Details
Weight |
Piston Pumps |
Minor Diameter [Min |
PVQ10 |
Cover End Pressure [Max |
16.0 LB |
Port Type |
Flange Mount |
Port Orientation - Shaft End |
Right Hand (CW) |
Controlled Flow Rate |
PVQ10-A2R-SE3S-20-CM7-12 |
Shaft End RPM [Max |
SAE |
Rotation |
Variable Displacement Open Circuit |
GPM @ 1,800 rpm, Cover End |
SAE-12 |
Cover End RPM [Max |
0.625 in |
Displacement Cover End (cu in/revolution) |
9 Tooth Splined |
Shaft End Flow @ RPM |
4.75 gpm @ 1750 rpm |
Pressure Port Size, Cover End |
SAE-12 |
Major Diameter [Max |
Single Shaft |
GPM @ 1,800 rpm, Shaft End |
Low Pressure Compensator |
Manufacturer Part No. |
Rear Port |
Integral Valve Configuration |
Buna-N |
Shaft Type |
3000 psi |
Shaft End Pressure [Max |
4.75 |
Minor Diameter |
SAE A, 2 Bolt |
Shaft Seal Type |
PVQ10-A2R-SE3S-20-CM7-12 |
Max. RPM [Max |
0.643 |
Pilot Type |
1500 psi |
Spline Description |
350 psi |