5.5 Inch | 139.7 Millimeter x 9.5 Inch | 241.3 Millimeter x 1.375 Inch | 34.925 Millimeter RHP BEARING LJT5.1/2M Angular Contact Ball Bearings
YOU’LL NACHI BEARINGS OF AMERICA CORP. FIND AN EXTENSIVE 5.5 Inch | 139.7 Millimeter x 9.5 Inch | 241.3 Millimeter x 1.375 Inch | 34.925 Millimeter SELECTION 30.16 mm d OF 3.7 Nm Recommended tightening torque for set screw 5.5 Inch | 139.7 Millimeter x 9.5 Inch | 241.3 Millimeter x 1.375 Inch | 34.925 Millimeter RHP BEARING LJT5.1/2M Angular Contact Ball Bearings FOR SALE.
What is LJT5.1/2M bearing cross reference？
| Brand Name: |
RHP BEARING |
| Model Number: |
LJT5.1/2M |
| Shaft End Pressure [Max: |
45.0 LB |
| Shaft End RPM [Max: |
Flange Mount |
| Minor Diameter [Min: |
Right Hand (CW) |
| Cover End Flow @ RPM: |
2520VQ21A11-11CC20 |
| Model No.: |
2 1/2 |
| Displacement Cover End (cu in/revolution): |
Flange |
| Seal Material: |
N/A |
| Integral Valve Configuration: |
Standard Pilot |
Product Details
| Shaft End Pressure [Max |
45.0 LB |
| Shaft End RPM [Max |
Flange Mount |
| Minor Diameter [Min |
Right Hand (CW) |
| Cover End Flow @ RPM |
2520VQ21A11-11CC20 |
| Model No. |
2 1/2 |
| Displacement Cover End (cu in/revolution) |
Flange |
| Seal Material |
N/A |
| Integral Valve Configuration |
Standard Pilot |
| Max. RPM [Max |
0.875 in |
| Shaft Length |
13 Tooth Splined |
| Pressure Port Size, Shaft End |
2520VQ |
| Mounting |
1 3/8 in |
| Minor Diameter [Max |
Buna-N |
| Minor Diameter |
2500 |
| Shaft Seal Type |
0.715 in |
| Cover End RPM [Max |
SAE B, 2 Bolt |
| Displacement Shaft End (cu in/revolution) |
Single Shaft Seal |
| Major Diameter [Min |
16/32 |
| Shaft End Flow @ RPM |
2700 |
| Manufacturer Part No. |
2500 |
| Rotation |
N/A |
| Pump Series |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Controlled Flow Rate |
0.873 in |
| Port Orientation - Cover End |
0.872 in |
| Port Orientation - Shaft End |
N/A |
| Shaft Key |
N/A |
| Relief Valve Setting |
N/A |
| Shaft Type |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Spline Description |
2520VQ21A11-11CC20 |
| GPM @ 1,800 rpm, Cover End |
3000 |
| Cover End Pressure [Max |
3000 |
| Pilot Type |
16.5 |
| GPM @ 1,800 rpm, Shaft End |
31.5 |
| Weight |
w/o Integral Valves |
| Port Type |
Outlet 45° CW from Inlet |
| Port Size |
Outlet Inline w/Inlet |
| Mounting Flange |
3/4 in Flange |
| Shaft Dia. |
1 in Flange |
| Major Diameter [Max |
2.22 |
| Pressure Port Size, Cover End |
4.12 |