4 Inch | 101.6 Millimeter x 7.25 Inch | 184.15 Millimeter x 1.25 Inch | 31.75 Millimeter RHP BEARING LJT4M Angular Contact Ball Bearings
Request A Quote For NACHI BEARINGS OF AMERICA CORP. Your Special 4 Inch | 101.6 Millimeter x 7.25 Inch | 184.15 Millimeter x 1.25 Inch | 31.75 Millimeter RHP BEARING LJT4M Angular Contact Ball Bearings Needs Today! Free RHP Bearing No Surface Treatment Quotes. ISO 9001 certified. 4 Inch | 101.6 Millimeter x 7.25 Inch | 184.15 Millimeter x 1.25 Inch | 31.75 Millimeter
What is LJT4M bearing cross reference？
| Brand Name: |
RHP BEARING |
| Model Number: |
LJT4M |
| Major Diameter [Max: |
45.0 LB |
| Weight: |
Flange Mount |
| Cover End Flow @ RPM: |
Right Hand (CW) |
| Displacement Shaft End (cu in/revolution): |
2520VQ17A8-11DD20 |
| GPM @ 1,800 rpm, Shaft End: |
2 1/2 |
| Port Type: |
Flange |
| Controlled Flow Rate: |
N/A |
| Rotation: |
Standard Pilot |
Product Details
| Major Diameter [Max |
45.0 LB |
| Weight |
Flange Mount |
| Cover End Flow @ RPM |
Right Hand (CW) |
| Displacement Shaft End (cu in/revolution) |
2520VQ17A8-11DD20 |
| GPM @ 1,800 rpm, Shaft End |
2 1/2 |
| Port Type |
Flange |
| Controlled Flow Rate |
N/A |
| Rotation |
Standard Pilot |
| Shaft End RPM [Max |
0.875 in |
| Seal Material |
13 Tooth Splined |
| Shaft Dia. |
2520VQ |
| Max. RPM [Max |
1 3/8 in |
| Manufacturer Part No. |
Buna-N |
| Pressure Port Size, Cover End |
2500 |
| Pilot Type |
0.715 in |
| GPM @ 1,800 rpm, Cover End |
SAE B, 2 Bolt |
| Model No. |
Single Shaft Seal |
| Port Size |
16/32 |
| Major Diameter [Min |
2700 |
| Displacement Cover End (cu in/revolution) |
2500 |
| Mounting |
N/A |
| Shaft Seal Type |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Minor Diameter |
0.873 in |
| Cover End RPM [Max |
0.872 in |
| Shaft End Pressure [Max |
N/A |
| Minor Diameter [Max |
N/A |
| Port Orientation - Shaft End |
N/A |
| Mounting Flange |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Shaft Type |
2520VQ17A8-11DD20 |
| Pump Series |
3000 |
| Pressure Port Size, Shaft End |
3000 |
| Minor Diameter [Min |
12 |
| Integral Valve Configuration |
25.5 |
| Port Orientation - Cover End |
w/o Integral Valves |
| Spline Description |
Outlet 135° CW from Inlet |
| Shaft End Flow @ RPM |
Outlet 90° CW from Inlet |
| Shaft Length |
3/4 in Flange |
| Relief Valve Setting |
1 in Flange |
| Cover End Pressure [Max |
1.67 |
| Shaft Key |
3.37 |