0.984 Inch | 25 Millimeter x 1.654 Inch | 42 Millimeter x 0.709 Inch | 18 Millimeter RHP BEARING 7905A5TRDUMP3 Precision Ball Bearings
The online 0.984 Inch | 25 Millimeter x 1.654 Inch | 42 Millimeter x 0.709 Inch | 18 Millimeter RHP BEARING 7905A5TRDUMP3 Precision Ball Bearings parts store gives you immediate access to a selection of more than 1.4 million new, NACHI BEARINGS OF AMERICA CORP. 0.984 Inch | 25 Millimeter x 1.654 Inch | 42 Millimeter x 0.709 Inch | 18 Millimeter used, remanufactured.
What is 7905A5TRDUMP3 bearing cross reference？
| Brand Name: |
RHP BEARING |
| Model Number: |
7905A5TRDUMP3 |
| Shaft Type: |
101.0 LB |
| Mounting Flange: |
Flange Mount |
| Weight: |
Right Hand (CW) |
| Shaft Length: |
4525V42A17-86DD22R |
| Cover End RPM [Max: |
3.5 |
| Integral Valve Configuration: |
Flange |
| Relief Valve Setting: |
3/8 in |
| Shaft Seal Type: |
22 |
Product Details
| Shaft Type |
101.0 LB |
| Mounting Flange |
Flange Mount |
| Weight |
Right Hand (CW) |
| Shaft Length |
4525V42A17-86DD22R |
| Cover End RPM [Max |
3.5 |
| Integral Valve Configuration |
Flange |
| Relief Valve Setting |
3/8 in |
| Shaft Seal Type |
22 |
| Pressure Port Size, Cover End |
1 in Code 61 |
| Port Orientation - Cover End |
1.5 in |
| Shaft End Flow @ RPM |
Straight w/ Key |
| GPM @ 1,800 rpm, Shaft End |
4525V |
| Displacement Shaft End (cu in/revolution) |
8.4 |
| Max. RPM [Max |
Double |
| Pump Series |
Buna-N |
| Displacement Cover End (cu in/revolution) |
3.4 |
| Seal Material |
N/A |
| Rotation |
SAE C, 2 Bolt |
| Controlled Flow Rate |
Single Shaft Seal |
| Cover End Pressure [Max |
N/A |
| Mounting |
Motor |
| Shaft Key |
1800 |
| Spline Description |
1800 |
| Pilot Type |
N/A |
| Manufacturer Part No. |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Cover End Flow @ RPM |
N/A |
| Port Orientation - Shaft End |
Outlet 90° CW from Inlet |
| Port Type |
N/A |
| Model No. |
N/A |
| Shaft End RPM [Max |
N/A |
| Pressure Port Size, Shaft End |
1 1/2 in Code 61 |
| Minor Diameter [Max |
4525V42A17-86DD22R |
| Major Diameter [Min |
4 Bolt Flange Per SAE J518C W/ English Threads |
| Minor Diameter [Min |
2500 |
| Shaft End Pressure [Max |
2500 |
| GPM @ 1,800 rpm, Cover End |
25.5 |
| Minor Diameter |
63 |
| Port Size |
135° CW From Inlet Port |
| Major Diameter [Max |
N/A |
| Shaft Dia. |
Outlet 135° CW from Inlet |