1.938 Inch | 49.225 Millimeter x 3.125 Inch | 79.38 Millimeter x 2.25 Inch | 57.15 Millimeter REXNORD ZA21150440 Pillow Block Bearings
How do I place 431,8 Outer Diameter (mm) an EMERGENCY order NACHI BEARINGS OF AMERICA CORP. for a 1.938 Inch | 49.225 Millimeter x 3.125 Inch | 79.38 Millimeter x 2.25 Inch | 57.15 Millimeter REXNORD ZA21150440 Pillow Block Bearings that I want to pick 1.938 Inch | 49.225 Millimeter x 3.125 Inch | 79.38 Millimeter x 2.25 Inch | 57.15 Millimeter up at a our store?
What is ZA21150440 bearing interchange？
| Brand Name: |
REXNORD |
| Model Number: |
ZA21150440 |
| Cover End RPM [Max: |
75.0 LB |
| Mounting: |
Flange Mount |
| Shaft Seal Type: |
Right Hand (CW) |
| Shaft Length: |
3520V35E5-86BA22R |
| Shaft End RPM [Max: |
3 |
| Port Orientation - Cover End: |
Flange |
| GPM @ 1,800 rpm, Cover End: |
5/16 in |
| Weight: |
Standard Pilot |
Product Details
| Cover End RPM [Max |
75.0 LB |
| Mounting |
Flange Mount |
| Shaft Seal Type |
Right Hand (CW) |
| Shaft Length |
3520V35E5-86BA22R |
| Shaft End RPM [Max |
3 |
| Port Orientation - Cover End |
Flange |
| GPM @ 1,800 rpm, Cover End |
5/16 in |
| Weight |
Standard Pilot |
| Port Type |
1.375 in |
| Major Diameter [Min |
Straight w/ Key |
| Shaft Key |
3520V |
| Port Orientation - Shaft End |
3 7/8 in |
| Model No. |
Buna-N |
| Mounting Flange |
1800 |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Shaft Type |
SAE C, 2 Bolt |
| Displacement Cover End (cu in/revolution) |
Single Shaft Seal |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Controlled Flow Rate |
1800 |
| Shaft End Flow @ RPM |
1800 |
| Minor Diameter |
N/A |
| Integral Valve Configuration |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Shaft End Pressure [Max |
N/A |
| Minor Diameter [Max |
N/A |
| Pump Series |
N/A |
| Major Diameter [Max |
N/A |
| Rotation |
N/A |
| Port Size |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Seal Material |
3520V35E5-86BA22R |
| Manufacturer Part No. |
3000 |
| Relief Valve Setting |
2500 |
| Cover End Flow @ RPM |
7.5 |
| Minor Diameter [Min |
52.5 |
| Pressure Port Size, Cover End |
N/A |
| Max. RPM [Max |
Outlet 135° CCW from Inlet |
| Shaft Dia. |
Outlet 90° CCW from Inlet |
| Cover End Pressure [Max |
3/4 in Code 61 |
| Spline Description |
1 1/4 in Code 61 |
| Pressure Port Size, Shaft End |
1.1 |
| Pilot Type |
6.8 |