REXNORD MHT9521512 Take Up Unit Bearings
YOU’LL 220 Bore Diameter (mm) 1 480 kN Basic static load rating (C0) FIND AN EXTENSIVE SELECTION OF NACHI BEARINGS OF AMERICA CORP. REXNORD MHT9521512 Take Up Unit Bearings FOR SALE.
What is MHT9521512 bearing cross reference？
| Brand Name: |
REXNORD |
| Model Number: |
MHT9521512 |
| GPM @ 1,800 rpm, Shaft End: |
75.0 LB |
| Shaft Dia.: |
Flange Mount |
| Minor Diameter [Min: |
Left Hand (CCW) |
| Pressure Port Size, Shaft End: |
3520VQ25A11-11CC20-LH |
| Integral Valve Configuration: |
3 |
| Port Size: |
Flange |
| Shaft Length: |
N/A |
| Max. RPM [Max: |
Standard Pilot |
Product Details
| GPM @ 1,800 rpm, Shaft End |
75.0 LB |
| Shaft Dia. |
Flange Mount |
| Minor Diameter [Min |
Left Hand (CCW) |
| Pressure Port Size, Shaft End |
3520VQ25A11-11CC20-LH |
| Integral Valve Configuration |
3 |
| Port Size |
Flange |
| Shaft Length |
N/A |
| Max. RPM [Max |
Standard Pilot |
| Port Orientation - Cover End |
1.25 in |
| Displacement Shaft End (cu in/revolution) |
5 |
| Weight |
3520VQ |
| Seal Material |
1 15/16 in |
| Cover End RPM [Max |
Double |
| Port Type |
Buna-N |
| Cover End Flow @ RPM |
2500 |
| Shaft Seal Type |
1.04 in |
| Pilot Type |
SAE C, 2 Bolt |
| Mounting |
Single Shaft Seal |
| Shaft End RPM [Max |
12/24 |
| Pump Series |
2500 |
| Model No. |
2500 |
| Shaft Type |
N/A |
| Pressure Port Size, Cover End |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) |
1.248 in |
| Cover End Pressure [Max |
1.247 in |
| Major Diameter [Max |
N/A |
| Shaft Key |
N/A |
| Spline Description |
N/A |
| GPM @ 1,800 rpm, Cover End |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Port Orientation - Shaft End |
3520VQ25A11-11CC20-LH |
| Minor Diameter [Max |
3000 |
| Shaft End Pressure [Max |
3000 |
| Mounting Flange |
16.5 |
| Rotation |
37.5 |
| Manufacturer Part No. |
w/o Integral Valves |
| Controlled Flow Rate |
Outlet 45° CW from Inlet |
| Relief Valve Setting |
Outlet Inline w/Inlet |
| Major Diameter [Min |
3/4 in Flange |
| Minor Diameter |
1 1/4 in Flange |
| Shaft End Flow @ RPM |
2.2 |