QM INDUSTRIES QVVFC22V312SN Flange Block Bearings
With over 10170 RoHS, REACH, DRC Con standards met: full-service stores, our QM INDUSTRIES QVVFC22V312SN Flange Block Bearings inventory is extensive and our parts 3/4 in D are priced NACHI BEARINGS OF AMERICA CORP. right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
What is QVVFC22V312SN bearing cross reference?
Brand Name: |
QM INDUSTRIES |
Model Number: |
QVVFC22V312SN |
Port Type: |
45.0 LB |
GPM @ 1,800 rpm, Shaft End: |
Flange Mount |
Model No.: |
Left Hand (CCW) |
GPM @ 1,800 rpm, Cover End: |
2520VQ14E14-11CC20-LH |
Port Orientation - Shaft End: |
2.5 |
Major Diameter [Min: |
Flange |
Minor Diameter [Min: |
N/A |
Pump Series: |
Standard Pilot |
Product Details
Port Type |
45.0 LB |
GPM @ 1,800 rpm, Shaft End |
Flange Mount |
Model No. |
Left Hand (CCW) |
GPM @ 1,800 rpm, Cover End |
2520VQ14E14-11CC20-LH |
Port Orientation - Shaft End |
2.5 |
Major Diameter [Min |
Flange |
Minor Diameter [Min |
N/A |
Pump Series |
Standard Pilot |
Port Orientation - Cover End |
0.875 in |
Shaft End RPM [Max |
13 Tooth Splined |
Weight |
2520VQ |
Cover End Pressure [Max |
1 3/8 in |
Shaft Length |
Double |
Major Diameter [Max |
Buna-N |
Mounting Flange |
2700 |
Shaft Dia. |
0.715 in |
Relief Valve Setting |
SAE B, 2 Bolt |
Displacement Shaft End (cu in/revolution) |
2.8 |
Shaft Type |
16/32 |
Pressure Port Size, Cover End |
2700 |
Pressure Port Size, Shaft End |
2700 |
Minor Diameter [Max |
N/A |
Manufacturer Part No. |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Max. RPM [Max |
0.873 in |
Shaft Seal Type |
0.872 in |
Minor Diameter |
N/A |
Integral Valve Configuration |
N/A |
Displacement Cover End (cu in/revolution) |
N/A |
Shaft End Pressure [Max |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Cover End RPM [Max |
2520VQ14E14-11CC20-LH |
Controlled Flow Rate |
2000 |
Seal Material |
3000 |
Mounting |
21 |
Pilot Type |
21 |
Port Size |
w/o Integral Valves |
Shaft Key |
Outlet 45° CW from Inlet |
Rotation |
Outlet Inline w/Inlet |
Shaft End Flow @ RPM |
1 1/16 in SAE O-Ring |
Cover End Flow @ RPM |
1 in Flange |
Spline Description |
2.8 |