QM INDUSTRIES QAAC10A050SEO Flange Block Bearings
With over 10170 full-service stores, our QM INDUSTRIES QAAC10A050SEO Flange Block Bearings inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving NACHI BEARINGS OF AMERICA CORP. time and your hard-earned In Stock Availability: 50mm d dollars.
What is QAAC10A050SEO bearing interchange？
| Brand Name: |
QM INDUSTRIES |
| Model Number: |
QAAC10A050SEO |
| Port Orientation - Cover End: |
45.0 LB |
| Port Size: |
Flange Mount |
| Manufacturer Part No.: |
Left Hand (CCW) |
| Integral Valve Configuration: |
2520VQ21C11-11CB20-LH |
| Port Type: |
2.5 |
| Shaft End RPM [Max: |
Flange |
| Relief Valve Setting: |
N/A |
| Pump Series: |
Standard Pilot |
Product Details
| Port Orientation - Cover End |
45.0 LB |
| Port Size |
Flange Mount |
| Manufacturer Part No. |
Left Hand (CCW) |
| Integral Valve Configuration |
2520VQ21C11-11CB20-LH |
| Port Type |
2.5 |
| Shaft End RPM [Max |
Flange |
| Relief Valve Setting |
N/A |
| Pump Series |
Standard Pilot |
| Shaft Dia. |
0.875 in |
| Mounting |
13 Tooth Splined |
| GPM @ 1,800 rpm, Shaft End |
2520VQ |
| Pilot Type |
1 3/8 in |
| Shaft Type |
Double |
| Displacement Shaft End (cu in/revolution) |
4.1 |
| Shaft End Flow @ RPM |
2500 |
| Controlled Flow Rate |
0.715 in |
| Displacement Cover End (cu in/revolution) |
SAE B, 2 Bolt |
| Model No. |
Single Shaft Seal |
| Cover End RPM [Max |
16/32 |
| Shaft Seal Type |
2700 |
| Cover End Flow @ RPM |
2500 |
| Seal Material |
N/A |
| GPM @ 1,800 rpm, Cover End |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Rotation |
0.873 in |
| Major Diameter [Min |
0.872 in |
| Max. RPM [Max |
N/A |
| Minor Diameter [Min |
N/A |
| Pressure Port Size, Cover End |
N/A |
| Shaft Length |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Minor Diameter |
2520VQ21C11-11CB20-LH |
| Minor Diameter [Max |
3000 |
| Port Orientation - Shaft End |
3000 |
| Weight |
16.5 |
| Shaft End Pressure [Max |
31.5 |
| Cover End Pressure [Max |
w/o Integral Valves |
| Major Diameter [Max |
Outlet 45° CCW from Inlet |
| Mounting Flange |
Outlet Inline w/Inlet |
| Spline Description |
1 1/16 in SAE O-Ring |
| Shaft Key |
1 5/16 in SAE O-Ring |
| Pressure Port Size, Shaft End |
2.2 |