2.688 Inch | 68.275 Millimeter x 3.86 Inch | 98.044 Millimeter x 3.25 Inch | 82.55 Millimeter LINK BELT PB22643H Pillow Block Bearings
How do you find the 2.688 Inch | 68.275 Millimeter x 3.86 Inch | 98.044 Millimeter x 3.25 Inch | 82.55 Millimeter LINK BELT PB22643H Pillow Block Bearings specification? 2.688 Inch | 68.275 Millimeter x 3.86 Inch | 98.044 Millimeter x 3.25 Inch | 82.55 Millimeter Manufacturers 62 Outer Diameter (mm) Online Free NACHI BEARINGS OF AMERICA CORP. check！ 18 mm Bc
What is PB22643H bearing cross reference？
| Brand Name: |
LINK BELT |
| Model Number: |
PB22643H |
| Weight: |
45.0 LB |
| Shaft End Pressure [Max: |
Flange Mount |
| Port Orientation - Shaft End: |
Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End: |
2520VQ21A11-11DD20 |
| Displacement Shaft End (cu in/revolution): |
2 1/2 |
| Cover End RPM [Max: |
Flange |
| Shaft End RPM [Max: |
N/A |
| Cover End Flow @ RPM: |
Standard Pilot |
Product Details
| Weight |
45.0 LB |
| Shaft End Pressure [Max |
Flange Mount |
| Port Orientation - Shaft End |
Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End |
2520VQ21A11-11DD20 |
| Displacement Shaft End (cu in/revolution) |
2 1/2 |
| Cover End RPM [Max |
Flange |
| Shaft End RPM [Max |
N/A |
| Cover End Flow @ RPM |
Standard Pilot |
| GPM @ 1,800 rpm, Shaft End |
0.875 in |
| Rotation |
13 Tooth Splined |
| Minor Diameter |
2520VQ |
| Cover End Pressure [Max |
1.375 in |
| Relief Valve Setting |
Buna-N |
| Shaft Seal Type |
2500 |
| Mounting |
0.715 in |
| Spline Description |
SAE B, 2 Bolt |
| Pressure Port Size, Shaft End |
Single Shaft Seal |
| Port Size |
16/32 |
| Pressure Port Size, Cover End |
2700 |
| Minor Diameter [Max |
2500 |
| Manufacturer Part No. |
N/A |
| Shaft Length |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Minor Diameter [Min |
0.873 in |
| Port Type |
0.872 in |
| Pilot Type |
N/A |
| Controlled Flow Rate |
N/A |
| Port Orientation - Cover End |
N/A |
| Model No. |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) |
2520VQ21A11-11DD20 |
| Major Diameter [Max |
3000 |
| Shaft Type |
3000 |
| Shaft End Flow @ RPM |
16.5 |
| Pump Series |
31.5 |
| Shaft Dia. |
w/o Integral Valves |
| Integral Valve Configuration |
Outlet 135° CW from Inlet |
| Mounting Flange |
Outlet 90° CW from Inlet |
| Major Diameter [Min |
3/4 in Flange |
| Seal Material |
1 in Flange |
| Shaft Key |
2.22 |
| Max. RPM [Max |
4.12 |