2.438 Inch | 61.925 Millimeter x 3.28 Inch | 83.312 Millimeter x 2.75 Inch | 69.85 Millimeter LINK BELT PB22639HK4 Pillow Block Bearings
What are the dimensions of 200 Outer Diameter (mm) a 2.438 Inch | 61.925 Millimeter x 3.28 Inch | 83.312 Millimeter x 2.75 Inch | 69.85 Millimeter LINK BELT PB22639HK4 Pillow Block Bearings? LINK BELT Manufacturing Service . Get Your Free, NACHI BEARINGS OF AMERICA CORP. Instant 2.438 Inch | 61.925 Millimeter x 3.28 Inch | 83.312 Millimeter x 2.75 Inch | 69.85 Millimeter Quote！
What is PB22639HK4 bearing interchange？
| Brand Name: |
LINK BELT |
| Model Number: |
PB22639HK4 |
| Pump Series: |
30.0 LB |
| Weight: |
Flange Mount |
| Manufacturer Part No.: |
Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End: |
V2010-1F8S2S-1DB12 |
| Major Diameter [Max: |
1 1/2 |
| Spline Description: |
Flange |
| Mounting: |
3/16 in |
| Shaft Key: |
N/A |
Product Details
| Pump Series |
30.0 LB |
| Weight |
Flange Mount |
| Manufacturer Part No. |
Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End |
V2010-1F8S2S-1DB12 |
| Major Diameter [Max |
1 1/2 |
| Spline Description |
Flange |
| Mounting |
3/16 in |
| Shaft Key |
N/A |
| Minor Diameter [Max |
0.875 in |
| Cover End Flow @ RPM |
Straight w/ Key |
| Relief Valve Setting |
V2010 |
| Shaft End Pressure [Max |
2.3125 in |
| Shaft Type |
Buna-N |
| Shaft Length |
2800 |
| Minor Diameter |
N/A |
| Port Type |
SAE B, 2 Bolt |
| Controlled Flow Rate |
Single Shaft Seal |
| Port Size |
N/A |
| Seal Material |
3000 |
| Port Orientation - Cover End |
2800 |
| Displacement Cover End (cu in/revolution) |
N/A |
| Pilot Type |
2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
| Shaft Seal Type |
N/A |
| Shaft End Flow @ RPM |
N/A |
| Cover End RPM [Max |
N/A |
| Max. RPM [Max |
N/A |
| Shaft End RPM [Max |
N/A |
| Model No. |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Cover End Pressure [Max |
V2010-1F8S2S-1DB12 |
| Shaft Dia. |
2500 |
| Pressure Port Size, Cover End |
2500 |
| Integral Valve Configuration |
3 |
| Rotation |
12 |
| Minor Diameter [Min |
N/A |
| Displacement Shaft End (cu in/revolution) |
Outlet 45° CCW from Inlet |
| Major Diameter [Min |
Outlet 90° CW from Inlet |
| Mounting Flange |
1/2 in SAE O-Ring |
| GPM @ 1,800 rpm, Shaft End |
3/4 in SAE O-Ring |
| Pressure Port Size, Shaft End |
0.4 |
| Port Orientation - Shaft End |
1.62 |