2.688 Inch | 68.275 Millimeter x 4 Inch | 101.6 Millimeter x 3.125 Inch | 79.38 Millimeter LINK BELT EPEB22443FE Pillow Block Bearings
How do 2.688 Inch | 68.275 Millimeter x 4 Inch | 101.6 Millimeter x 3.125 Inch | 79.38 Millimeter you find the NACHI BEARINGS OF AMERICA CORP. 2.688 Inch | 68.275 Millimeter x 4 Inch | 101.6 Millimeter x 3.125 Inch | 79.38 Millimeter LINK BELT EPEB22443FE Pillow Block Bearings specification? Manufacturers Online Free check！ 2.505 Wall Thickness (S3)
What is EPEB22443FE bearing interchange？
| Brand Name: |
LINK BELT |
| Model Number: |
EPEB22443FE |
| Port Orientation - Cover End: |
45.0 LB |
| Pilot Type: |
Flange Mount |
| Cover End RPM [Max: |
Right Hand (CW) |
| Pressure Port Size, Shaft End: |
2520VQ21A5-1DD20 |
| Minor Diameter [Max: |
2.5 |
| Shaft Dia.: |
Flange |
| Cover End Pressure [Max: |
3/16 in |
| Controlled Flow Rate: |
Standard Pilot |
Product Details
| Port Orientation - Cover End |
45.0 LB |
| Pilot Type |
Flange Mount |
| Cover End RPM [Max |
Right Hand (CW) |
| Pressure Port Size, Shaft End |
2520VQ21A5-1DD20 |
| Minor Diameter [Max |
2.5 |
| Shaft Dia. |
Flange |
| Cover End Pressure [Max |
3/16 in |
| Controlled Flow Rate |
Standard Pilot |
| Major Diameter [Max |
0.875 in |
| Port Size |
Straight w/ Key |
| Integral Valve Configuration |
2520VQ |
| Shaft Key |
1 15/16 in |
| Cover End Flow @ RPM |
Double |
| Weight |
Buna-N |
| Shaft End Flow @ RPM |
2500 |
| Shaft End Pressure [Max |
N/A |
| Seal Material |
SAE B, 2 Bolt |
| Mounting |
Single Shaft Seal |
| Port Type |
N/A |
| Rotation |
2700 |
| Displacement Cover End (cu in/revolution) |
2500 |
| Relief Valve Setting |
N/A |
| Shaft Type |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Minor Diameter [Min |
N/A |
| Pressure Port Size, Cover End |
N/A |
| Shaft Length |
N/A |
| Shaft Seal Type |
N/A |
| Manufacturer Part No. |
N/A |
| Mounting Flange |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Port Orientation - Shaft End |
2520VQ21A5-1DD20 |
| Minor Diameter |
3000 |
| Displacement Shaft End (cu in/revolution) |
4.1 |
| Spline Description |
7.5 |
| Major Diameter [Min |
31.5 |
| Max. RPM [Max |
w/o Integral Valves |
| Pump Series |
Outlet 135° CW from Inlet |
| GPM @ 1,800 rpm, Cover End |
Outlet 90° CW from Inlet |
| Shaft End RPM [Max |
3/4 in Flange |
| GPM @ 1,800 rpm, Shaft End |
1 in Flange |
| Model No. |
1.1 |