ISOSTATIC FF-1102-2 Sleeve Bearings
Online shopping ISOSTATIC FF-1102-2 Sleeve Bearings Removable Metal Shie Accessories from a great selection NACHI BEARINGS OF AMERICA CORP. 182000 N Basic Dynamic Radial Load Rating C at 3000 rpm Grease Speed Rating Open/Shielded n1 Store. ... ISOSTATIC Bearing Accessories.
What is FF-1102-2 bearing interchange？
| Brand Name: |
ISOSTATIC |
| Model Number: |
FF-1102-2 |
| Spline Description: |
45.0 LB |
| Displacement Shaft End (cu in/revolution): |
Flange Mount |
| Shaft Type: |
Left Hand (CCW) |
| Minor Diameter: |
2520VQ21A5-1CB20-LH |
| GPM @ 1,800 rpm, Cover End: |
2 1/2 |
| Shaft Seal Type: |
Flange |
| Mounting: |
3/16 in |
| Relief Valve Setting: |
Standard Pilot |
Product Details
| Spline Description |
45.0 LB |
| Displacement Shaft End (cu in/revolution) |
Flange Mount |
| Shaft Type |
Left Hand (CCW) |
| Minor Diameter |
2520VQ21A5-1CB20-LH |
| GPM @ 1,800 rpm, Cover End |
2 1/2 |
| Shaft Seal Type |
Flange |
| Mounting |
3/16 in |
| Relief Valve Setting |
Standard Pilot |
| Manufacturer Part No. |
0.875 in |
| Port Orientation - Cover End |
Straight w/ Key |
| Shaft Key |
2520VQ |
| Pilot Type |
1 15/16 in |
| Displacement Cover End (cu in/revolution) |
Buna-N |
| Shaft Dia. |
2500 |
| Mounting Flange |
N/A |
| Port Orientation - Shaft End |
SAE B, 2 Bolt |
| Port Size |
Single Shaft Seal |
| Minor Diameter [Min |
N/A |
| Integral Valve Configuration |
2700 |
| Cover End Pressure [Max |
2500 |
| Pressure Port Size, Shaft End |
N/A |
| Cover End Flow @ RPM |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Model No. |
N/A |
| Rotation |
N/A |
| Shaft Length |
N/A |
| Cover End RPM [Max |
N/A |
| Port Type |
N/A |
| Minor Diameter [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM |
2520VQ21A5-1CB20-LH |
| GPM @ 1,800 rpm, Shaft End |
3000 |
| Pressure Port Size, Cover End |
3000 |
| Seal Material |
7.5 |
| Pump Series |
31.5 |
| Shaft End Pressure [Max |
w/o Integral Valves |
| Weight |
Outlet 45° CCW from Inlet |
| Controlled Flow Rate |
Outlet Inline w/Inlet |
| Major Diameter [Min |
3/4 in Flange |
| Major Diameter [Max |
1 in Flange |
| Shaft End RPM [Max |
1.1 |
| Max. RPM [Max |
4.12 |