ISOSTATIC AA-620-1 Sleeve Bearings
With over 10170 full-service stores, our ISOSTATIC AA-620-1 Sleeve Bearings inventory is 38.1 mm D2 extensive and our parts are NACHI BEARINGS OF AMERICA CORP. priced right. within 24 hours. This helps you maximize 80 N·m/mrad Static moment stiffness your productivity by saving time and your hard-earned dollars.
What is AA-620-1 bearing cross reference?
Brand Name: |
ISOSTATIC |
Model Number: |
AA-620-1 |
Major Diameter [Min: |
76.0 LB |
Minor Diameter: |
Flange Mount |
Pressure Port Size, Shaft End: |
Right Hand (CW) |
Shaft End Pressure [Max: |
3525VQ35A21-1CC20 |
Major Diameter [Max: |
3 |
Spline Description: |
Flange |
Cover End Pressure [Max: |
5/16 in |
Rotation: |
Standard Pilot |
Product Details
Major Diameter [Min |
76.0 LB |
Minor Diameter |
Flange Mount |
Pressure Port Size, Shaft End |
Right Hand (CW) |
Shaft End Pressure [Max |
3525VQ35A21-1CC20 |
Major Diameter [Max |
3 |
Spline Description |
Flange |
Cover End Pressure [Max |
5/16 in |
Rotation |
Standard Pilot |
Shaft Seal Type |
1.25 in |
Mounting |
Straight w/ Key |
GPM @ 1,800 rpm, Cover End |
3525VQ |
Pilot Type |
2.5 in |
Max. RPM [Max |
Double |
Port Size |
Buna-N |
Model No. |
2400 |
Shaft Dia. |
N/A |
Displacement Shaft End (cu in/revolution) |
6.9 |
Pump Series |
Single Shaft Seal |
Controlled Flow Rate |
N/A |
Port Type |
2500 |
Relief Valve Setting |
2400 |
Minor Diameter [Max |
N/A |
Shaft Length |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Port Orientation - Shaft End |
N/A |
Shaft Type |
N/A |
Seal Material |
N/A |
Shaft Key |
N/A |
Shaft End RPM [Max |
N/A |
Manufacturer Part No. |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
Weight |
3525VQ35A21-1CC20 |
Cover End RPM [Max |
3000 |
Cover End Flow @ RPM |
3000 |
Pressure Port Size, Cover End |
31.5 |
GPM @ 1,800 rpm, Shaft End |
52.5 |
Mounting Flange |
w/o Integral Valves |
Displacement Cover End (cu in/revolution) |
Outlet 45° CW from Inlet |
Integral Valve Configuration |
Outlet Inline w/Inlet |
Port Orientation - Cover End |
1 in Flange |
Minor Diameter [Min |
1 1/4 in Flange |
Shaft End Flow @ RPM |
4.1 |