ISOSTATIC AA-1325-4 Sleeve Bearings
We 3300 rpm Oil Speed Rating Open/Shielded n2 Provide NACHI BEARINGS OF AMERICA CORP. Extensive ISOSTATIC AA-1325-4 Sleeve Bearings 203000 N Basic Dynamic Radial Load Rating C Selection 55.00 mm B And Competitive Wholesale Pricing.
What is AA-1325-4 bearing cross reference？
| Brand Name: |
ISOSTATIC |
| Model Number: |
AA-1325-4 |
| Seal Material: |
45.0 LB |
| Shaft Key: |
Flange Mount |
| Rotation: |
Left Hand (CCW) |
| Displacement Shaft End (cu in/revolution): |
4.1 |
| Mounting: |
2.5 |
| Minor Diameter: |
Flange |
| Shaft Type: |
N/A |
| Port Size: |
Standard Pilot |
Product Details
| Seal Material |
45.0 LB |
| Shaft Key |
Flange Mount |
| Rotation |
Left Hand (CCW) |
| Displacement Shaft End (cu in/revolution) |
4.1 |
| Mounting |
2.5 |
| Minor Diameter |
Flange |
| Shaft Type |
N/A |
| Port Size |
Standard Pilot |
| Mounting Flange |
0.875 in |
| Major Diameter [Min |
13 Tooth Splined |
| Shaft Dia. |
2520VQ |
| Shaft Seal Type |
1.375 in |
| Integral Valve Configuration |
Double |
| Weight |
Buna-N |
| Max. RPM [Max |
2500 |
| Port Orientation - Cover End |
0.715 in |
| Pressure Port Size, Cover End |
SAE B, 2 Bolt |
| Port Type |
Single Shaft Seal |
| Controlled Flow Rate |
16/32 |
| GPM @ 1,800 rpm, Cover End |
2700 |
| Cover End RPM [Max |
2500 |
| Pilot Type |
N/A |
| Pressure Port Size, Shaft End |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Spline Description |
0.873 in |
| Shaft End RPM [Max |
0.872 in |
| Shaft Length |
N/A |
| Cover End Flow @ RPM |
N/A |
| Shaft End Pressure [Max |
N/A |
| GPM @ 1,800 rpm, Shaft End |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) |
2520VQ21A11-11BC20-LH |
| Major Diameter [Max |
3000 |
| Minor Diameter [Max |
3000 |
| Relief Valve Setting |
16.5 |
| Manufacturer Part No. |
31.5 |
| Shaft End Flow @ RPM |
w/o Integral Valves |
| Minor Diameter [Min |
Outlet 45° CW from Inlet |
| Model No. |
Outlet 90° CCW from Inlet |
| Pump Series |
3/4 in Flange |
| Port Orientation - Shaft End |
1 in Flange |
| Cover End Pressure [Max |
2.2 |