FAG NU316-E-TVP2-C3 Cylindrical Roller Bearings
Manufacturers of all FAG Bearing are represented in our NACHI BEARINGS OF AMERICA CORP. partial list Clearance/Non-C seal type: of clients. Contact Gary for a complete FAG NU316-E-TVP2-C3 Cylindrical Roller Bearings list of clients and projects.
What is NU316-E-TVP2-C3 bearing interchange?
Brand Name: |
FAG |
Model Number: |
NU316-E-TVP2-C3 |
Max. RPM [Max: |
101.0 LB |
Shaft Seal Type: |
Flange Mount |
Manufacturer Part No.: |
Right Hand (CW) |
Displacement Cover End (cu in/revolution): |
4525V42A21-86AA22R |
Major Diameter [Max: |
3.5 |
Minor Diameter [Min: |
Flange |
Shaft End Pressure [Max: |
3/8 in |
Relief Valve Setting: |
Standard Pilot |
Product Details
Max. RPM [Max |
101.0 LB |
Shaft Seal Type |
Flange Mount |
Manufacturer Part No. |
Right Hand (CW) |
Displacement Cover End (cu in/revolution) |
4525V42A21-86AA22R |
Major Diameter [Max |
3.5 |
Minor Diameter [Min |
Flange |
Shaft End Pressure [Max |
3/8 in |
Relief Valve Setting |
Standard Pilot |
Spline Description |
1.5 in |
Controlled Flow Rate |
Straight w/ Key |
Model No. |
4525V |
Pump Series |
3.4375 in |
Port Type |
Double |
Cover End RPM [Max |
Buna-N |
Mounting |
1800 |
Pressure Port Size, Shaft End |
N/A |
Port Orientation - Cover End |
SAE C, 2 Bolt |
Integral Valve Configuration |
Single Shaft Seal |
Minor Diameter [Max |
N/A |
Pressure Port Size, Cover End |
1800 |
Cover End Flow @ RPM |
1800 |
Weight |
N/A |
Rotation |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Mounting Flange |
N/A |
Minor Diameter |
N/A |
Shaft Dia. |
N/A |
Port Size |
N/A |
Shaft Type |
N/A |
GPM @ 1,800 rpm, Cover End |
42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm |
Pilot Type |
4525V42A21-86AA22R |
Shaft Key |
2500 |
Shaft Length |
2500 |
GPM @ 1,800 rpm, Shaft End |
31.5 |
Cover End Pressure [Max |
63 |
Displacement Shaft End (cu in/revolution) |
8.4 |
Major Diameter [Min |
Outlet 135° CCW from Inlet |
Seal Material |
Outlet Opposite Inlet |
Port Orientation - Shaft End |
1 in Code 61 |
Shaft End RPM [Max |
1 1/2 in Code 61 |
Shaft End Flow @ RPM |
4.1 |