FAG 6207-Z Single Row Ball Bearings
The online FAG 6207-Z Single Row Ball Bearings parts store Cast Iron housing material: gives you immediate access to a selection of more NACHI BEARINGS OF AMERICA CORP. 1-15/16 in d than 1.4 2000 series: million new, used, remanufactured.
What is 6207-Z bearing interchange？
| Brand Name: |
FAG |
| Model Number: |
6207-Z |
| Mounting Flange: |
45.0 LB |
| Major Diameter [Max: |
Flange Mount |
| Port Orientation - Shaft End: |
Left Hand (CCW) |
| Minor Diameter [Min: |
2520VQ12A5-11BC20LH |
| Rotation: |
2 1/2 |
| Controlled Flow Rate: |
Flange |
| Pressure Port Size, Cover End: |
N/A |
| Relief Valve Setting: |
Standard Pilot |
Product Details
| Mounting Flange |
45.0 LB |
| Major Diameter [Max |
Flange Mount |
| Port Orientation - Shaft End |
Left Hand (CCW) |
| Minor Diameter [Min |
2520VQ12A5-11BC20LH |
| Rotation |
2 1/2 |
| Controlled Flow Rate |
Flange |
| Pressure Port Size, Cover End |
N/A |
| Relief Valve Setting |
Standard Pilot |
| Pilot Type |
0.875 in |
| Weight |
13 Tooth Splined |
| Seal Material |
2520VQ |
| Pump Series |
1 3/8 in |
| Integral Valve Configuration |
Buna-N |
| Port Orientation - Cover End |
2700 |
| Max. RPM [Max |
0.715 in |
| Shaft Length |
SAE B, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Model No. |
16/32 |
| Shaft Type |
2700 |
| Mounting |
2700 |
| Shaft End Pressure [Max |
N/A |
| GPM @ 1,800 rpm, Shaft End |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Major Diameter [Min |
0.873 in |
| Minor Diameter |
0.872 in |
| Manufacturer Part No. |
N/A |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Pressure Port Size, Shaft End |
N/A |
| Shaft Key |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM |
2520VQ12A5-11BC20LH |
| Spline Description |
3000 |
| Displacement Cover End (cu in/revolution) |
3000 |
| GPM @ 1,800 rpm, Cover End |
7.5 |
| Shaft Dia. |
18 |
| Minor Diameter [Max |
w/o Integral Valves |
| Cover End Flow @ RPM |
Outlet 45° CW from Inlet |
| Port Type |
Outlet 90° CCW from Inlet |
| Port Size |
3/4 in Flange |
| Cover End Pressure [Max |
1 in Flange |
| Cover End RPM [Max |
1.1 |
| Shaft End RPM [Max |
2.45 |