240 mm x 360 mm x 76 mm FAG 32048-X Tapered Roller Bearing Assemblies
Welcome to the 240 mm x 360 mm x 76 mm 240 mm x 360 mm x 76 mm FAG 32048-X Tapered Roller Bearing Assemblies online 16 mm overall nut width: seller. NACHI BEARINGS OF AMERICA CORP.
What is 32048-X bearing cross reference？
| Brand Name: |
FAG |
| Model Number: |
32048-X |
| Max. RPM [Max: |
76.0 LB |
| Displacement Shaft End (cu in/revolution): |
7.4 |
| Cover End Flow @ RPM: |
Left Hand (CCW) |
| Pump Series: |
3525VQ38A21-11AA20-LH |
| Shaft Seal Type: |
3 |
| Shaft End RPM [Max: |
Flange |
| Seal Material: |
N/A |
| Shaft Key: |
Standard Pilot |
| PDF |
32048-X |
Product Details
| Max. RPM [Max |
76.0 LB |
| Displacement Shaft End (cu in/revolution) |
7.4 |
| Cover End Flow @ RPM |
Left Hand (CCW) |
| Pump Series |
3525VQ38A21-11AA20-LH |
| Shaft Seal Type |
3 |
| Shaft End RPM [Max |
Flange |
| Seal Material |
N/A |
| Shaft Key |
Standard Pilot |
| Port Orientation - Shaft End |
1.25 in |
| Major Diameter [Max |
14 Tooth Splined |
| Shaft End Flow @ RPM |
3525VQ |
| Rotation |
1.9375 in |
| Mounting Flange |
Double |
| Shaft Type |
Buna-N |
| Minor Diameter |
2400 |
| Cover End Pressure [Max |
1.04 in |
| Cover End RPM [Max |
SAE C, 2 Bolt |
| Shaft Dia. |
Single Shaft Seal |
| Port Type |
12/24 |
| Pilot Type |
2500 |
| Port Orientation - Cover End |
2400 |
| Pressure Port Size, Shaft End |
N/A |
| Pressure Port Size, Cover End |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Integral Valve Configuration |
1.248 in |
| Weight |
1.247 in |
| Shaft Length |
N/A |
| Controlled Flow Rate |
N/A |
| Port Size |
N/A |
| GPM @ 1,800 rpm, Cover End |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) |
3525VQ38A21-11AA20-LH |
| Relief Valve Setting |
3000 |
| Model No. |
3000 |
| Major Diameter [Min |
31.5 |
| Minor Diameter [Max |
57 |
| GPM @ 1,800 rpm, Shaft End |
w/o Integral Valves |
| Mounting |
Outlet 135° CCW from Inlet |
| Minor Diameter [Min |
Outlet Opposite Inlet |
| Manufacturer Part No. |
1 in Flange |
| Shaft End Pressure [Max |
1 1/4 in Flange |
| Spline Description |
4.1 |